Built P7100,Injectors and Misc Parts.......
#1
Built P7100,Injectors and Misc Parts.......
With the recent sale of my 98 12v truck I have ended up with a host of extras that I would like to move to make room for CR Parts for my new truck.Here is a list of what I have that needs to find new homes.......
1-Built P7100 913 Pump...
This is a pump that was built by the late Curtis Rice who worked for Antrim Diesel down in Greencastle,PA.It was built and ran on his stand which flowed 650cc's.It has his barrel/plungers,quick rate cam,governor springs and was one of the biggest 12mm pumps he would build.It was NEVER installed on my truck as the 500cc pump he built me did what I needed and without twins I felt I didn't need anymore fuel.........$2800 OBO + Shipping
2-Fresh set of Modified 370's...Done by Weston Shupe..Reworked spray angle,pintle lift and pops raised....Never installed since they came back....$300 +Shipping
3-94-01 Dodge Ram 1500/2500 Xenon Fender Flares...New In Box and never installed...Box was opened by me and they were never installed.....$300+Shipping
4-98-02 Triple Gauge A-Pillar w/Tweeter..New never installed.....$25+Shipping
5-.093 P7100 Scheid Diesel Stainless Steel Lines....Used......$250+shipping
6-Used AFE Stage 2 Air Filters....1 Inverted Top(Mega-Cannon) & 1 Pro-Guard 7(these are the 6" round Bottom Filters)......Best Offer+Shipping
7-Misc 12v Factory Parts....2 Air Horns...2 Sets Of Valve Covers...1 Set Of Water Lines...Best Offer+Shipping
8-215HP Factory Injectors....Came out of my truck....Best Offer+Shipping
9-Factory Plow Package Front Coils..Out Of My truck when leveling kit was installed...Best Offer+Shipping
10-Aftermarket Fiberglass Front Lower Air Dam w light pockets....Best Offer+Shipping(It is going to be tough to box but we can work it out).
11-5" Aluminized,no muffler exhaust..new in box,never opened....Fits all 04.5-07 5.9 Rams...$250 obo+Shipping
I think there is more laying around but I have not found it all yet so I will add to this as I get the shop/storage cleaned out.Drop me a PM here or email me direct at TDRHammer@gmail.com if your interested.I can take PayPal and will ship with UPS..............Andy
1-Built P7100 913 Pump...
This is a pump that was built by the late Curtis Rice who worked for Antrim Diesel down in Greencastle,PA.It was built and ran on his stand which flowed 650cc's.It has his barrel/plungers,quick rate cam,governor springs and was one of the biggest 12mm pumps he would build.It was NEVER installed on my truck as the 500cc pump he built me did what I needed and without twins I felt I didn't need anymore fuel.........$2800 OBO + Shipping
2-Fresh set of Modified 370's...Done by Weston Shupe..Reworked spray angle,pintle lift and pops raised....Never installed since they came back....$300 +Shipping
3-94-01 Dodge Ram 1500/2500 Xenon Fender Flares...New In Box and never installed...Box was opened by me and they were never installed.....$300+Shipping
4-98-02 Triple Gauge A-Pillar w/Tweeter..New never installed.....$25+Shipping
5-.093 P7100 Scheid Diesel Stainless Steel Lines....Used......$250+shipping
6-Used AFE Stage 2 Air Filters....1 Inverted Top(Mega-Cannon) & 1 Pro-Guard 7(these are the 6" round Bottom Filters)......Best Offer+Shipping
7-Misc 12v Factory Parts....2 Air Horns...2 Sets Of Valve Covers...1 Set Of Water Lines...Best Offer+Shipping
8-215HP Factory Injectors....Came out of my truck....Best Offer+Shipping
9-Factory Plow Package Front Coils..Out Of My truck when leveling kit was installed...Best Offer+Shipping
10-Aftermarket Fiberglass Front Lower Air Dam w light pockets....Best Offer+Shipping(It is going to be tough to box but we can work it out).
11-5" Aluminized,no muffler exhaust..new in box,never opened....Fits all 04.5-07 5.9 Rams...$250 obo+Shipping
I think there is more laying around but I have not found it all yet so I will add to this as I get the shop/storage cleaned out.Drop me a PM here or email me direct at TDRHammer@gmail.com if your interested.I can take PayPal and will ship with UPS..............Andy
#3
Not without an adapter that will size you up from the 4inch that the stocker is to a 6inch that the AFE filters are.You could do that but I do not have anyway of doing that here.
I also have a set of .093 J&L Machine EDM'd Delivery valve Holders here which I forgot to list.I'd like to see $100+shipping on them.
I also have a set of .093 J&L Machine EDM'd Delivery valve Holders here which I forgot to list.I'd like to see $100+shipping on them.
#4
Dangit o well, thanks anyways man
---AutoMerged DoublePost---
Bump for ya
---AutoMerged DoublePost---
Bump for ya
Last edited by aguilar_15; 04-06-2011 at 04:47 PM. Reason: Automerged Doublepost
#6
Add to the list of goodies....
Factory clutch fan assembly complete and fan shroud...Best Offer + Shipping.
The fan clutch was not that old when I removed it in favor of the Flex-A-Lite fan set-up.
Factory clutch fan assembly complete and fan shroud...Best Offer + Shipping.
The fan clutch was not that old when I removed it in favor of the Flex-A-Lite fan set-up.
#7
can you send me a pic of the air dam . Might be interested in the coils and filters also. I am not to far away and could pick it all up. dovetailcustombuilding@verizon.net
Thanks
Thanks
#9
With the recent sale of my 98 12v truck I have ended up with a host of extras that I would like to move to make room for CR Parts for my new truck.Here is a list of what I have that needs to find new homes.......
1-Built P7100 913 Pump...
This is a pump that was built by the late Curtis Rice who worked for Antrim Diesel down in Greencastle,PA.It was built and ran on his stand which flowed 650cc's.It has his barrel/plungers,quick rate cam,governor springs and was one of the biggest 12mm pumps he would build.It was NEVER installed on my truck as the 500cc pump he built me did what I needed and without twins I felt I didn't need anymore fuel.........$2800 OBO + Shipping
2-Fresh set of Modified 370's...Done by Weston Shupe..Reworked spray angle,pintle lift and pops raised....Never installed since they came back....$300 +Shipping.....SOLD
3-94-01 Dodge Ram 1500/2500 Xenon Fender Flares...New In Box and never installed...Box was opened by me and they were never installed.....$300+Shipping
4-98-02 Triple Gauge A-Pillar w/Tweeter..New never installed.....$25+Shipping
5-.093 P7100 Scheid Diesel Stainless Steel Lines....Used......$250+shipping
6-Used AFE Stage 2 Air Filters....1 Inverted Top(Mega-Cannon) & 1 Pro-Guard 7(these are the 6" round Bottom Filters)......Best Offer+Shipping
7-Misc 12v Factory Parts....2 Air Horns...2 Sets Of Valve Covers...1 Set Of Water Lines...Best Offer+Shipping.....ALL SOLD
8-215HP Factory Injectors....Came out of my truck....Best Offer+Shipping....SOLD
9-Factory Plow Package Front Coils..Out Of My truck when leveling kit was installed...Best Offer+Shipping
10-Aftermarket Fiberglass Front Lower Air Dam w light pockets....Best Offer+Shipping(It is going to be tough to box but we can work it out).
11-5" Aluminized,no muffler exhaust..new in box,never opened....Fits all 04.5-07 5.9 Rams...$250 obo+Shipping.....SOLD
12-.093 EDM'd DV Holders by J&L Machine..Never Used.....$100+shipping
13-Factory Clutch Fan Assembly/Fan Shroud..came off my truck with the install of the Flex-A-Lite fans.......Best Offer+Shipping
There is the updated list as of today.As soon as the monsoon stops I will get the photo's to better show acouple of the items....Andy
---AutoMerged DoublePost---
dove33...
Will get you a pic as soon as the rain lets up and I don't have to trudge back through the swampy yard to the storage shop,LOL.The front coils came out of my truck at 15,000 miles when I did the leveling kit.Filters are in their boxes just sitting on the shop shelf.I will email pics to you and would meet you halfway or if your going to the NEPA Lunch on Sunday in Scranton I would bring them along,Let me know.
adub12valve...
Yes I still have the gauge pillar.......Andy
1-Built P7100 913 Pump...
This is a pump that was built by the late Curtis Rice who worked for Antrim Diesel down in Greencastle,PA.It was built and ran on his stand which flowed 650cc's.It has his barrel/plungers,quick rate cam,governor springs and was one of the biggest 12mm pumps he would build.It was NEVER installed on my truck as the 500cc pump he built me did what I needed and without twins I felt I didn't need anymore fuel.........$2800 OBO + Shipping
2-Fresh set of Modified 370's...Done by Weston Shupe..Reworked spray angle,pintle lift and pops raised....Never installed since they came back....$300 +Shipping.....SOLD
3-94-01 Dodge Ram 1500/2500 Xenon Fender Flares...New In Box and never installed...Box was opened by me and they were never installed.....$300+Shipping
4-98-02 Triple Gauge A-Pillar w/Tweeter..New never installed.....$25+Shipping
5-.093 P7100 Scheid Diesel Stainless Steel Lines....Used......$250+shipping
6-Used AFE Stage 2 Air Filters....1 Inverted Top(Mega-Cannon) & 1 Pro-Guard 7(these are the 6" round Bottom Filters)......Best Offer+Shipping
7-Misc 12v Factory Parts....2 Air Horns...2 Sets Of Valve Covers...1 Set Of Water Lines...Best Offer+Shipping.....ALL SOLD
8-215HP Factory Injectors....Came out of my truck....Best Offer+Shipping....SOLD
9-Factory Plow Package Front Coils..Out Of My truck when leveling kit was installed...Best Offer+Shipping
10-Aftermarket Fiberglass Front Lower Air Dam w light pockets....Best Offer+Shipping(It is going to be tough to box but we can work it out).
11-5" Aluminized,no muffler exhaust..new in box,never opened....Fits all 04.5-07 5.9 Rams...$250 obo+Shipping.....SOLD
12-.093 EDM'd DV Holders by J&L Machine..Never Used.....$100+shipping
13-Factory Clutch Fan Assembly/Fan Shroud..came off my truck with the install of the Flex-A-Lite fans.......Best Offer+Shipping
There is the updated list as of today.As soon as the monsoon stops I will get the photo's to better show acouple of the items....Andy
---AutoMerged DoublePost---
dove33...
Will get you a pic as soon as the rain lets up and I don't have to trudge back through the swampy yard to the storage shop,LOL.The front coils came out of my truck at 15,000 miles when I did the leveling kit.Filters are in their boxes just sitting on the shop shelf.I will email pics to you and would meet you halfway or if your going to the NEPA Lunch on Sunday in Scranton I would bring them along,Let me know.
adub12valve...
Yes I still have the gauge pillar.......Andy
Last edited by Hammer; 04-08-2011 at 08:32 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post