2nd gen Dodge triple turbos
#11
I'm kinda green on trips, how's the spool up on one of these setups and how many psi is it capable of? I've also been told that even when running a straight pipe that it makes the truck really quiet?
#12
spool is similar to a 62/65/14, max boost is close to 100psi but gated (ATM) to 75psi. Each turbo acts like a muffler. I have dual 5" exhaust so its still got some growl.
it is comparable to a 62/591 set of twins, but spools much faster up top.
it is comparable to a 62/591 set of twins, but spools much faster up top.
#14
12mm pump w/ comp delivery valves, .084 lines/tubes, +250 injectors, no plate, AFC fully modded, 2095 plug, 4k springs, ect.
---AutoMerged DoublePost---
SOLD!
---AutoMerged DoublePost---
SOLD!
Last edited by Turbolvr; 01-21-2011 at 11:22 AM. Reason: Automerged Doublepost
#16
I have a couple of questions to be able to get my head around this insane looking set-up.
What was the exhaust configuration on those three turbos?
Was it smoky or very clean?
Do you happen to have a video of that truck running that set-up?
Thanks
What was the exhaust configuration on those three turbos?
Was it smoky or very clean?
Do you happen to have a video of that truck running that set-up?
Thanks
#17
No vid on that set, but I do have a vid of a different set:
http://s815.photobucket.com/albums/zz80/turbolvr/videos/?action=view¤t=tripsburnoutclippb.flv
the exhaust ran from the manifold to the bottom turbo. then from that into a schd 40 hotpipe to the two top turbos and into a Y pipe down to the 5" exhaust.
http://s815.photobucket.com/albums/zz80/turbolvr/videos/?action=view¤t=tripsburnoutclippb.flv
the exhaust ran from the manifold to the bottom turbo. then from that into a schd 40 hotpipe to the two top turbos and into a Y pipe down to the 5" exhaust.
Last edited by Turbolvr; 01-23-2011 at 09:08 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Cdog121
1st Generation Dodge Cummins 89-93
6
11-16-2015 01:49 PM
Cumminsfreak24
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
01-21-2015 09:10 AM