built 4x4 P-pump 24v FS/FT
 

OK guys here goes one more try, please read the whole ad and I will try to cover it all.


I have my eye on a reg cab 2wd SB but I may also trade for a mildly built Common rail or Dmax that is a reg cab 2wd or 4wd or crew cab 4wd


The truck dyno'ed 672/1471 on Dunbar's dyno at Jeff Garmon's shop day. It is capable of 700+ easy with some mild tweaks. The torque converter lock-up wire came un hooked so it was down shifting. These numbers are the 4th or 5th and only clean pull he got with it and the run was started at over 90mph. It was also only at 20* timing with the plate still in.

2002 dodge 4x4 quad cab short bed 187k miles
$16,500obo
Tranny has Goerend billet triple disk, billet input, VB, and daves other Magic. It was gone through and rebuilt by Tim Barber at TRE and had one of Opie's billet out put's and a freshen up.
S&B intake
Homeade intake horn
Bullseye S471 71x102/83x74 with a T4 .90 exh housing
Stainless diesel T4 manifold
O-rings done by Tim at TRE
.010" over CNC'd 12 head gasket from Snedge
12mm ARP head studs
F1 sportsman springs
Hamilton 181/210 cam
DDP Comp injectors
913 pump with 4k's, custom plate, AFC work, DDP Comp DV's
.093" injection lines and cross tubes
Bully dog fluidamper (same as fluidamper)
vented tappet cover
AD150 with 40 psi spring
4"S400down pipe with 5" exhaust to 6" tip
Stewart Warner guages boost,EGT, FP The FP needs a tubing kit and the boost and EGT both need new bulbs
Leather interior, front seats are worrn but come with Mopar canvas style fitted seat covers, back seat is great
dash is craked but has a cover from Geno's
After market CD player
B&W turnover ball in bed and reciever hitch out back
Procomp 6001 20x9's with new 305/50/20 falkens
New front and rear break pads and new rear calipers
Geno's cup holder because the stocker broke
onboard air system with 8+gallon tank, 2x viair 380c compressors, and Klein horns
Over drive shifts on its own at about 70mph but also runs off a switch at any speed
over head sunglasses holder broken
passenger window will go up and down from passenger side and up from the drivers side but the drivers side switch will only roll it down every 1000 attempts or so
check engine light is on from the P-pump swap
The ABS and E-brake light stay on but brakes work fine, I have replaced both ABS sensors in the front, and every sensor that has anything to do with it and they wont go away
Missing a fog light on the passenger side
front bumper plastic is starting to come loose
has hole in the bed from a stack



The truck does have some minor dings but no big dents. It has a few scratches but no rust. Over all it is a solid built running truck. I love the truck and listed it a while back when I was in a huge financial jam but that has passed. I have though of keeping it but would like a new project. If you have any questions at all feel free to call I am a pretty up front and honest guy and I will tell you any little flaw the truck has


Last dyno vid



Attachment 44029
Attachment 44030
Attachment 44031
Attachment 44032
Attachment 44033
Attachment 44034
Attachment 44035
Attachment 44036
Attachment 44037
Attachment 44038
Attachment 44039
Attachment 44040

Bump to the top. This truck is my reliable daily driver. I just drove it to Garmon's shop day in GA and back. With 181's in the pump I have grossed 18k+ towing with it.

Attachment 44010
Attachment 44011
Attachment 44012
Attachment 44013
Attachment 44014
Attachment 44015
Attachment 44016
Attachment 44017

---AutoMerged DoublePost---

Morning bump for a fun truck.

This truck is awesome and not gonna lie, this is the truck that made me do my p pump! bump for a sweet truck that someone needs to to buy and will LOVE!!!! If i had the cash, id but it and pull it:w2:

Thanks man I will definitely miss it but my next project will be just as fun.

wish i could get my jeep sold. I would have to have this truck

Try and sell it. It will be hard to find another one like this for a steal lol.

---AutoMerged DoublePost---

Sounds like I may have a serious buyer, I sure hope so I am ready to get started on a new project!

---AutoMerged DoublePost---

One guy has the money together and another wants to see it soon but it is still here for now.

good to hear buddy!!!:jump:

I got a PM on another forum tonight and may have found an AWESOME trade!!!!!!!!!!!

what u getting in trade?

Ok guys I found 2 trucks I would love to buy, let's get this one sold!

whats ur next project ideas?

2wd regular cab shortbed.

mmm that is my favorite next project, 2wd shortbed cummins swap. 4link rear.... that or a Monty Carlo Cummins swap

looking at your truck makes me not like you, it would look way better in my driveway too :dang:

Lol $16.5k and you can punch me in the stomach, driv the trucks home, and not have the guilty conscience of having to dislike me anymore.

yes but god hates me so im rebuilding my tranny again but thats the truck i wanted before i bought mine that thing is beautiful good luck with the sale :tu:

Bump for a nice christmas gift!!!!!!!!!!

Damn, you know times are hard when your still sittin on this truck.

i'm gonna tell a guy here in town about it...i seen him today and he just sold his 3rd gen and he's wantin a second gen now and would like one allready built i didnt know if you still had this one or not was why i came and looked so i will tell him about it...how do you like that turbo?...how well does it spool?...i have a similar turbo S474/82/.90T4 that i was thinking about putting on my wifes 2nd gen auto

Nice truck:tu:SWEEEEETTT:rocking:

Bump again, someone buy this!!!!!!!! It will be getting detailed next week.

---AutoMerged DoublePost---

Tell him about it!!! I have found a suitable replacement and need to sell it. I have already turned down offers though so tell him to hurry:D:D:D

BUMP!!!!!!!!!!!! anymore offers?????????

Nice truck! Bump...

BUMP!!!!!!!!!!!!!

---AutoMerged DoublePost---

BUMP!!!!!!!!!!!!!

---AutoMerged DoublePost---

It looks like I have a trade worked out for the truck! Just need to setup a time!!!

if u still have it feb 1st consider it sold!... i look on here everyday hoping it isnt sold:w2: closing on my new house feb 1st and my loan officer told me not to take out any credit till it closes:argh:

did it sell?:humm:

You broke my heart last time!!!:argh: Just saw this now, still got it?

I am supposed to be trading it off soon, If anything happens I will let you guys know:c:

Trade!?! Personally, i would never trade something i put a s**t load of time and effort into for something i havent touched. i would trade with money on top so that cash can go into the new ride, just my .02! :c:

i hope the motor on the other truck blows on the way to trade for your truck:w2:

I will be getting cash ontop and making plenty of changes!!!!!!!

---AutoMerged DoublePost---

:bat::bat::bat:

:dang::dang::dang::c::c:

Whats the word??? :argh:

I am on I10 headed to Texas right now to trade it.

:dang::dang::scare2::s:

SOLD,SOLD,SOLD!!!!!!!!!!!!!!!!!!!!

congrats on gettin rid of it. its been awhile since listed:tu:

Thanks!

So what was it traded for?