Air lockers
#1
Air lockers
I have two ARB air lockers that I no longer need.
First one will fit a dana 60 4.10 and lower, will also work 4.10 and up with a ring gear spacer. 30 spline. 550+shipping
The second will fit a Dana 80 4.10 and higher 35 spline 550+shipping.
also have a set of ring and pinions for a dana 60 and dana 80. the set for the dana 60 has a 5.13 ratio and has been used. $200+shipping. The Dana 80 is brand new also with a 5.13 ratio 300+shipping.
I'll post some pics tomorrow.
---AutoMerged DoublePost---
Pic's of the arb for the Dana 60
Pic's of the arb for the Dana 80
here is the barley used 5.13 r and p for a d60. the guy I bought them from had the pinion depth a set wrong but there is nothing wrong with them.
here is the brand new 5.13's for a Dana 80
First one will fit a dana 60 4.10 and lower, will also work 4.10 and up with a ring gear spacer. 30 spline. 550+shipping
The second will fit a Dana 80 4.10 and higher 35 spline 550+shipping.
also have a set of ring and pinions for a dana 60 and dana 80. the set for the dana 60 has a 5.13 ratio and has been used. $200+shipping. The Dana 80 is brand new also with a 5.13 ratio 300+shipping.
I'll post some pics tomorrow.
---AutoMerged DoublePost---
Pic's of the arb for the Dana 60
Pic's of the arb for the Dana 80
here is the barley used 5.13 r and p for a d60. the guy I bought them from had the pinion depth a set wrong but there is nothing wrong with them.
here is the brand new 5.13's for a Dana 80
Last edited by 94 12valve; 11-22-2010 at 09:45 PM. Reason: Automerged Doublepost
#3
still have it if ya want it
---AutoMerged DoublePost---
TTT
---AutoMerged DoublePost---
TTT
Last edited by 94 12valve; 11-24-2010 at 12:53 PM. Reason: Automerged Doublepost
#5
ARB Air Locking Differential-RH3
---AutoMerged DoublePost---
also make sure you have 30 spline axels not 32 spline. If you have 32 spline and want the locker you can call arb for the parts to swap it over to either 32 or 35 spline axels.
Last edited by 94 12valve; 11-25-2010 at 06:32 AM. Reason: Automerged Doublepost