I have many, many 1989 through 1993 Dodge Cummins parts, engines, transmissions, trim parts, interior, exterior, fenders, doors, hoods, grilles, tailgates, beds, dually, single wheel, 4x4, 2x4, axles, 3.07, 3.54, 4.10, transfer cases, 23 spline, 29 spline, you name it, I may have it.
If I don't have it, I can probably help you find it!!!

The following is a list and condition of parts trucks that I have on hand.
Some can be had as PROJECTS:

1992 D-350 C/C Dually, very rusty, runs & drives, no rear fenders, solid fenders, good I/C core support.

1991 (Intercooled) w-250 Cab/frame, HAS 3.54 axles and np205 29 spline T-case, rustfree 5 speed 4wd cab w/gray interior.

1991 (non-I/Ced) w-250 Cab/frame, HAS 3.07 axles, np205 23 spline T-case, rustfree auto 4wd cab w/red interior.

1990 4wd w-250, has complete (excellent running) engine, also has a 5 speed (needs rebuilt) and np205 29 spline T-case, truck is complete minus axles and bed, BUT it is extremely beat up and would need a front clip and doors.

1989 2WD D-250, 1 ton on singles, decent, usable Texas body with very burned-up paint, no engine, has transmission and 3.07 rear axle, basically just needs an engine, a patch in the front bed floor (rust) and some TLC.

Call 402-780-5127 or E-mail me at Nixon340@yahoo.com
I ALSO DO TRADES AND I CAN DO LONG-DISTANCE TRANSPORT ON WHAT I SELL!!!

 

you have any 2nd gen stuff?

 

Very little, I don't actively search for it.
What are you needing?

Mark.

 

Do you have the arm rest for a 93?..Mine are the grey ones. I would need both sides if you have them...

 

Would you happen to have a set of stock intercooled injectors?

 

jumpnjed, I have both armrests, driver's side is decent, as is the passenger's side, $30, shipped on the pair.

white93, I have a set of '92 injectors with @130,000 miles on them, been out of the engine for a while, $150, shipped.

Mark.

 

hey mark i forgot i posted in here... but im looking for a np 241 transfer case i think... ill have to go double check

---AutoMerged DoublePost---

yes it is a 241... heavy duty

 

Looks like your the guy I need to talk to. A coworker of mine just gernaded the 5 spd in his 92 ram 250 4x4. He doesn't use this site but is in pretty desperate need of a tranny so he can keep getting to his tractor pulls. What do you have in that line of stuff? Idk what you all need to know his is intercooled and 4x4 located just north of Fargo, ND. The sooner I know somethin the sooner I can have my truck back. Thanks

 

I need all 4 grille inserts for a 93, pretty sure a few earlier years work also. how much if ya got em

 

Wisconsin Redneck, I MIGHT know of a 5 speed 241 DHD, which is what yours should be.
I may know something soon, a local guy has one.

98Cummins, he called, we talked, twice.

Budgreen, I have a set of 4 inserts, $30, shipped.

Mark.