50 Mm wastegate
#1
50 Mm wastegate
I'm selling my 50mm ED gate, has a t4/t4 adapter, and a steel connector tube. I put a bigger turbine housing on my charger and no longer need this gate. The gate works as it should, comes with an adjustable boost elbow, flex pipe with V band to connect to your exhaust down pipe , and a set of plates that I made to tune her in off the truck. Gate will also come with two exaust gaskets and 4 10mm bolts. $400 + shipping.
#4
this is a big wastegate used on chargers with a t4 exhaust housing foot. it will keep your drive pressure in check.
regulated boost is fed in the top port and drive pressure in the bottom. as drive press is raised above the set boost than the gate will open and vent the extra pressure.
regulated boost is fed in the top port and drive pressure in the bottom. as drive press is raised above the set boost than the gate will open and vent the extra pressure.
#10
to the top for offers
---AutoMerged DoublePost---
sale pending
---AutoMerged DoublePost---
sale pending
Last edited by 94 12valve; 07-04-2010 at 12:57 PM. Reason: Automerged Doublepost