built 47re
Go RAVENS!!!!!!!!!
Joined: Mar 2007
Posts: 1,145
Likes: 229
From: Kingsville, MD
So is it a 47RH or RE? Here's the reason i ask.
Auto trans specs - Dodge Ram pickup
&
Auto trans specs - Dodge Ram pickup
Oh also, putting in a shift kit and VB doesn't make a stock trans a "built" trans. If 1st & 2nd were slipping then i think it needs more than the bands adjusted.
Auto trans specs - Dodge Ram pickup
&
Auto trans specs - Dodge Ram pickup
Oh also, putting in a shift kit and VB doesn't make a stock trans a "built" trans. If 1st & 2nd were slipping then i think it needs more than the bands adjusted.
Last edited by scottsjeeprolet; May 12, 2010 at 06:03 AM.
Thread Starter
|
Diesel Enthusiast
Joined: Apr 2009
Posts: 396
Likes: 10
From: ohio
no 96 had a 47re 94s and 95 had 47rhs,
not sure exactly how many miles are on the tranny since the parts and rebuilt off hand i have paper work in my truck binder that will show it.
the converter is a bd low stall converter, as with the valve body and the deep pan is a tci
like i stated before i had a master tech look at it while it was in the truck and after i took it out to swap in the nv4500 and said the bands will need to be adjusted to get 1st to 2nd shift firmer.
as for where in ohio, i have two houses in ohio ranging from knox county to lorain county and down to school at ohio state so any where along 71 for the most part.
pm if interested
---AutoMerged DoublePost---
as stated before if you would read... it has a bd low stall converter, bd valve body, shift kit and a billet tci deep tranny pan. no it doesnt have shafts
---AutoMerged DoublePost---
would you prefer "built up" sorry it doesnt fit your discription of "built transmission"
not sure exactly how many miles are on the tranny since the parts and rebuilt off hand i have paper work in my truck binder that will show it.
the converter is a bd low stall converter, as with the valve body and the deep pan is a tci
like i stated before i had a master tech look at it while it was in the truck and after i took it out to swap in the nv4500 and said the bands will need to be adjusted to get 1st to 2nd shift firmer.
as for where in ohio, i have two houses in ohio ranging from knox county to lorain county and down to school at ohio state so any where along 71 for the most part.
pm if interested
---AutoMerged DoublePost---
So is it a 47RH or RE? Here's the reason i ask.
Auto trans specs - Dodge Ram pickup
&
Auto trans specs - Dodge Ram pickup
Oh also, putting in a shift kit and VB doesn't make a stock trans a "built" trans. If 1st & 2nd were slipping then i think it needs more than the bands adjusted.
Auto trans specs - Dodge Ram pickup
&
Auto trans specs - Dodge Ram pickup
Oh also, putting in a shift kit and VB doesn't make a stock trans a "built" trans. If 1st & 2nd were slipping then i think it needs more than the bands adjusted.
---AutoMerged DoublePost---
would you prefer "built up" sorry it doesnt fit your discription of "built transmission"
Last edited by 96blackcloud; May 12, 2010 at 09:37 AM. Reason: Automerged Doublepost
Go RAVENS!!!!!!!!!
Joined: Mar 2007
Posts: 1,145
Likes: 229
From: Kingsville, MD
In my book and most everyone's a built trans is one that has been rebuilt with upgraded clutch's and other internal mods.
Adding bolt on parts doesn't qualify as built. Mine's got the same mods and isn't built, just hanging on for now.
Good luck with your sale, it's still a great price.
Adding bolt on parts doesn't qualify as built. Mine's got the same mods and isn't built, just hanging on for now.
Good luck with your sale, it's still a great price.
