1st gen parts. mechanical and body
#1
03-27-2010, 09:17 PM
1st gen parts. mechanical and body
Truck was a LE model. I am keeping the dash and all wiring for a crew cab project but this is what is left. It had a red interior and most of it is still there with the exception of the dash.
Nice Argent 89 grill center $100
Clean 8' bed w/o tailgate. $450
Power Doors $150 ea
Solid Fenders $100 ea
Cab, drivers floor has a hole in it under the gas pedal and the front mount bolts broke off in the cab $200
Frame true 1 ton "tall" frame $350
Set of 3.07 rears complete end to end with decent brakes front rear has selecto hubs. $1100 for the pair or $600 ea
Non IC VE with lines pretty much maxed out but ac lever still there has a "ground" fuel pin $500
NP 205 transfer case with coupling $300
Short Block 368K still has cross hatch in cyl wall $800
3 1/2" DP with exhaust band clamp $75
3 1/2" around tcase to 4" $75
Set of 5" turn outs $100
Almost new 235/85/16 Goodyear Silent armor "E" rated tires on Ford Steel wheels tires have less then 1000 mi $800
Kelderman Single Bag rear Air ride with compressor and in cab "computer" $700
Rough Country nitro shocks fairly new $100
If you don't see anything listed let me know and I will check to see if I have it. Willing to take pictures and email them just PM me you email. Location is Pen Argyl Pa 18072 will ship but prefer local pick up also willing to meet as long as the distance isn't to far.
Thanks, Ryan
Nice Argent 89 grill center $100
Clean 8' bed w/o tailgate. $450
Power Doors $150 ea
Solid Fenders $100 ea
Cab, drivers floor has a hole in it under the gas pedal and the front mount bolts broke off in the cab $200
Frame true 1 ton "tall" frame $350
Set of 3.07 rears complete end to end with decent brakes front rear has selecto hubs. $1100 for the pair or $600 ea
Non IC VE with lines pretty much maxed out but ac lever still there has a "ground" fuel pin $500
NP 205 transfer case with coupling $300
Short Block 368K still has cross hatch in cyl wall $800
3 1/2" DP with exhaust band clamp $75
3 1/2" around tcase to 4" $75
Set of 5" turn outs $100
Almost new 235/85/16 Goodyear Silent armor "E" rated tires on Ford Steel wheels tires have less then 1000 mi $800
Kelderman Single Bag rear Air ride with compressor and in cab "computer" $700
Rough Country nitro shocks fairly new $100
If you don't see anything listed let me know and I will check to see if I have it. Willing to take pictures and email them just PM me you email. Location is Pen Argyl Pa 18072 will ship but prefer local pick up also willing to meet as long as the distance isn't to far.
Thanks, Ryan
Last edited by Free89W350; 03-28-2010 at 12:57 PM.
#5
04-01-2010, 08:41 AM
Diesel Enthusiast
Would you happen to have the black plastic storage tray that goes behind the seat of a standard cab fist gen?
#7
04-08-2010, 01:16 PM
Diesel Fan
Man i need the fenders! are they in good shape? and what would it cost to send to 77331 Coldspring, Texas. Pm me pics. or more info
#8
04-09-2010, 10:04 AM
Diesel Enthusiast
ok man i need the entire speed sensor part off of the tranny the l shaped adapter and the sensor because mine is cracked please pm me if you can idk if you have the part butt let me know
#9
04-10-2010, 09:14 AM
Diesel Enthusiast
do you have the front grill and is it in nice shape? desperately in need of one to complete the body work
