Selling my Banks stainless Monster Exhaust - currently installed on my 2007 Reg Cab, Long bed LBZ. I know it is a bolt on for the RC long bed trucks. Any competent muffler shop should be able to fit it to other cab/chassis configurations. I can get you approximate measurements to compare with your exhaust if you want.

Bolts onto factory system -true 4" stainless exhaust.
Includes intermediate pipe, muffler, tailpipe, clamps, and hangar, and 5" polished tip.

Has been installed on my truck just under 15k miles. Excellent shape - truck only goes to the track or around the block on nice days. Tip has a few light scratches and I am sure there is some rubber stuck to the tailpipe in places (due to the burnouts at the drag strip).

Banks advertises a 98% improvement in backpressure (vs stock) and 176% better flow and I don't doubt it at all.
I have dynoed as high as 811hp at the rear wheels and ran mid 11s passes while running this exhaust and have not noticed any drop off in power. I love the mellow sound (no in-cab drone).

$300 obo. If you want to pay shipping I can see about shipping. It will require oversize shipping charges to be aware of that. If I remember it cost me over $100 to have it shipped from Banks.

Thanks
John
(479) 422-7196

 

ttt

---AutoMerged DoublePost---

Muffler, tailpipe, tip, hangars, and clamps are off the truck and ready to go. $200

 

are we goin with a stack set up john? or 5 inch?

 

Banks muffler, tailpipe, polished tip, hangars, and clamps still available.

Going back with a 5" stack to keep from smoking out the beams on the starting line

 

thats what i figured u were gonna do, ill see if i can find anyone needing an exhaust