Cleaning Out The Garage
#1
Diesel Enthusiast
Thread Starter
Cleaning Out The Garage
front sway bar for 97 dodge- make an offer
stock airbox from 98 12valve- $30 shipped
silencer ring from HX35- $5.00shipped
used steering gear box - good core, or even replacement has pitman arm off of 95 2wd, $50 OBO
stock AM/FM tape player out of dodge $50shipped
radiator support for 94+ dodge ram $30 u-ship
complete rear driveshaft set up for 2wd dodge ram CTD- $30 u-ship
stock dark gray/black drivers side A-pillar from a 98 CTD, $15.00
lund hoodscoops, never installed, just tape backing is peeling off,{the large ones} freshly pro-painted black needs tape and the screens for the fronts, $30 u-ship
stock 12-valve manifold $30 u-ship
2nd gen stock turn signal lenses used $9 a piece, or $15 for the set u-ship
have a decent surpentine belt, a few radiator hosesand intercooler boots, shoot me an offer.
hummer H-2 alum. 17"rims with center holes already cut to except dodge hubs $250 u-ship
dodge ram head reciever pug with the lit up rams head- $10 u-ship
SCHWITZER S300so18 turbo with big exhuast port {off big rig} good turbo, needs a home $200 you ship...
all prices are not set in stone, but dont need any low ballers.......... located in Elma Iowa {N.E} 50628
Last edited by DB Admin; 07-15-2008 at 06:45 PM.
#2
Interested in the factory a pillar if its still got all the clips. Can you let me know what shipping is to 59106?
#4
Diesel Enthusiast
Thread Starter
I can get you all I know about the turbo, which isnt much other then what is on the ID tag..... I know its free spinning, has an oil line, no slop in wheel, and it does not fit the dodge exhuast manifold, its bigger as in ,off a freightliner.....
if you need all the info on the ID Tag, I can grab it..... as far as the stock pillar, its actually dark gray, almost black, and yes, it does have all its clips......
Im not sure on the shipping to Canada, and to Montana, I would say $12. for the pillar
and $40 for the turbo.....
Shawn
if you need all the info on the ID Tag, I can grab it..... as far as the stock pillar, its actually dark gray, almost black, and yes, it does have all its clips......
Im not sure on the shipping to Canada, and to Montana, I would say $12. for the pillar
and $40 for the turbo.....
Shawn
#10
Diesel Enthusiast
Thread Starter
Do you mean the drive shafts??
if so, I can find out, but I wil have to find a big box!LOL
---AutoMerged DoublePost---
Nope!, its not tore up, and frankly you buy it, you can do whatever yhe heck you want with it!!, I would by a nice chrome chain for it though, if your gonna hang it from your neck....
pm sent
Last edited by doodah; 07-14-2008 at 10:37 PM. Reason: Automerged Doublepost