does anyone know how hard these kits are to install. any help would be great. i want to install one just for a little more protection on my tranny ive been reading and it doesnt seem to hard but just want your guys .02 what tools i will need if i have to remove the trany ect thanks guys

 

They are not bad it takes about 2 hours to install. Simple hand tools is all you need.

 

are people having pretty good luck with these kits im just trying to keep **** on the safe side with giving the dmax a lil power like i always say (O im not guna get crazy this time but every time i end up geting crazy with power

 

It will help, more or less a band-aid though. Your converter will be the next weak link...

 

Like said above it's more or a band aid. It will allow you to hold around 110-120 at the wheels. Those numbers vary if you have larger tires.

 

so what converter would you guy recomend me getting

 

I suggest a full trans build if you plan on doing a converter.

 

What kinda power ya gonna throw at that 09? If your just gonna run a mild tune it should be good, that 6 speed takes a bit more torture than the 5 speed..If your talking TC might as well save up and get the Suncoast IV and be done with it..JMHO

 

im guna put somewhere around a 100 horse tune to it you think it will hold it

 

id do the transgo jr to be on the safe side. It might just be a bandaid but its better than nothing. But the first time it slips (when u switch that tune to a 150+) might as well park the truck, i slipped my trans and ever since its been crapy keep de-tuneing it but still dosent help