Holset Model: H20
#1
Holset Model: H20
Before I get hammered on the search tab, yes I did search and the only thing that was comin up was water/meth kits. So the turbo in question is on a Cummins generator and the on the tag instead of saying HX40 or HX50 and so on all it gave was a serial number and then Model H20. Does anyone have a clue what the specs on this would be or where I could find them. I'm trying to build a twins set on the cheap. Any help is really appreciated.
#2
You can always get one of those fancy tools and measure the wheels to see what you're working with. With enough fabbing, you can probably make anything work
---AutoMerged DoublePost---
Looked it up. You sure its not an HX20? Says it was used in light duty commercial engine applications up to 4 liters of displacement (so about 240ci).
www.cummins.com/turbos - Holset HX20-25-27
If so, its going to be smaller than your stock HX35. I believe the bigger the number, the bigger the turbo on this series of Holsets.
---AutoMerged DoublePost---
Looked it up. You sure its not an HX20? Says it was used in light duty commercial engine applications up to 4 liters of displacement (so about 240ci).
www.cummins.com/turbos - Holset HX20-25-27
If so, its going to be smaller than your stock HX35. I believe the bigger the number, the bigger the turbo on this series of Holsets.
Last edited by EasternAggie; 01-26-2011 at 10:00 AM. Reason: Automerged Doublepost
#3
No, I've actually found out that it's not a zero. That zero is a D. Apparently they put a slash mark / through the zeros on the stamps so you can tell the difference. It's actually a H2D. I searched that one and found some info, but not much. I would measure, but I don't have one of those fancy tools.
#5
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
09-02-2015 01:30 AM
Diesel Bombers
Latest Automotive Industry News
0
07-21-2015 07:50 AM
Cumminsfreak24
Dodge Truck and Cummins Turbo Diesel Forum
0
05-06-2015 04:56 PM
Diesel Bombers
Latest Automotive Industry News
0
02-12-2015 03:00 AM