Stiker Water/Meth. Injection systems!
#1
Stiker Water/Meth. Injection systems!
WITH THE PAINLESS PERFORMANCE STRIKER COLDSHOT WATER/METHANOL INJECTION SYSTEM
* YOU GET THE PAINLESS LIFE TIME WARRANTY!
* Safely Increase Your Horsepower and Torque
* Extend The Life Of Your Turbo-Charger
* Decrease Your Exhaust Gas Temperature
* Everything You Need Is Included (No Running To The Hardware Store)
* Commercial Grade 12V Water Solenoid (Included)
* Industrial Quality Nickel Plated Fittings (Included-No Cheap Plastic Here)
* Two Quart Reservoir (Included)
* Pre-Installed Level Sensor For Low Water Indication (Included)
* 25 Ft Of 1/4" Tubing (Included)
* 150 PSI High Volume Shurflo Water/Methanol Pump (Included)
* A Painless Performance™ Harness (Included-Not Just A Roll Of Wire)
* Three Very Fine Mist (VFM) High Volume Nozzles To Choose From
* Custom Designed Nozzle Bushing For Easy Nozzle Swapping/Cleaning
* Easy To Follow, Step-By-Step, Detailed Installation Manual With Images Showing You Every PAINLESS Step
* Our Expert Tech Support Whose Sole Mission Is To Assist Our Customers, Just Call Our Toll Free Tech Line Monday-Friday 8-5 Central Time
The highest quality, most complete water/methanol injection system on the market. The on-board control monitor features an LED gauge displaying boost pressure from 0 to 100 PSI and a 60 LED gauge showing the preset injection curve. The controller features an adjustable injection curve display, water level warning indicator and a dimming function for night and day brightness.
_________________
Make it Easy, Make it Simple, Make it Painless.
* YOU GET THE PAINLESS LIFE TIME WARRANTY!
* Safely Increase Your Horsepower and Torque
* Extend The Life Of Your Turbo-Charger
* Decrease Your Exhaust Gas Temperature
* Everything You Need Is Included (No Running To The Hardware Store)
* Commercial Grade 12V Water Solenoid (Included)
* Industrial Quality Nickel Plated Fittings (Included-No Cheap Plastic Here)
* Two Quart Reservoir (Included)
* Pre-Installed Level Sensor For Low Water Indication (Included)
* 25 Ft Of 1/4" Tubing (Included)
* 150 PSI High Volume Shurflo Water/Methanol Pump (Included)
* A Painless Performance™ Harness (Included-Not Just A Roll Of Wire)
* Three Very Fine Mist (VFM) High Volume Nozzles To Choose From
* Custom Designed Nozzle Bushing For Easy Nozzle Swapping/Cleaning
* Easy To Follow, Step-By-Step, Detailed Installation Manual With Images Showing You Every PAINLESS Step
* Our Expert Tech Support Whose Sole Mission Is To Assist Our Customers, Just Call Our Toll Free Tech Line Monday-Friday 8-5 Central Time
The highest quality, most complete water/methanol injection system on the market. The on-board control monitor features an LED gauge displaying boost pressure from 0 to 100 PSI and a 60 LED gauge showing the preset injection curve. The controller features an adjustable injection curve display, water level warning indicator and a dimming function for night and day brightness.
_________________
Make it Easy, Make it Simple, Make it Painless.
Last edited by Painless Performance; 08-15-2007 at 12:57 PM.
The following users liked this post:
Johnny Cetane (08-15-2007)
#2
That sounds top notch. Do you have any pics of the set-up?
I'd also like to know how the curve is adjusted?
Does it take a boost input from the intake manifold or from a exhaust thermocouple or both?
I'm really looking hard at a water/meth setup. I'd like as much information about yours as I can get.
Thank you sir,
Andy
»»»»»»»»»»»««««««««««««
AutoMerged DoublePost
»»»»»»»»»»»««««««««««««
Here's some info I found on their site.
http://www.painlessperformance.com/w...SearchField=32
THAT IS ONE SWEET LOOKING SETUP!!!
I'd also like to know how the curve is adjusted?
Does it take a boost input from the intake manifold or from a exhaust thermocouple or both?
I'm really looking hard at a water/meth setup. I'd like as much information about yours as I can get.
Thank you sir,
Andy
»»»»»»»»»»»««««««««««««
AutoMerged DoublePost
»»»»»»»»»»»««««««««««««
Here's some info I found on their site.
http://www.painlessperformance.com/w...SearchField=32
THAT IS ONE SWEET LOOKING SETUP!!!
Last edited by AndyMan; 08-15-2007 at 02:06 PM. Reason: Automerged Doublepost
#3
#4
#6
I don't see why you couldn't but we do not sell the controller by itself. There is a possibilty that depending on some of the different types of systems out there that it may not because of pressure differences and because some systems out there use mechanical parts where we use electric.
Thread
Thread Starter
Forum
Replies
Last Post
7.3dieselMike
Alternative Fuels , Additives , Fluids
1
10-28-2014 01:46 PM