Hey Guys Where We At With power on these babies ?

 

No Box or chip here.

 

Here is the link to the dyno info on our site. This is actual dyno numbers from our modules on completely stock trucks.

http://www.painlessperformance.com/a...log/page10.pdf

 

that's some pretty respectable power gains.

 

Our goal was to be able to take a stock truck and not have to make any other modifications to it in order to run in high out put mode. That is pretty much the cap before you have to start worrying about EGT's.

 

level six is 350hp at the crank(according to manufacturer)
With a lift pump and a tranny this tuner has been dynoed at 500+/- rwhp

 

I've been eyeballing your boxes.. Whats the going rate for your boxes?
Scott

 

That will depend on the vendor that you deal with. To list some they would be Jegs, Summit, 4 Wheel Parts, Napa, Autozone, O'Riely's. IIRC you are looking somewhere around $450 or so. But I haven't checked on that lately. I do know that some vendors will run a special on them from time to time.