HOW TO: Propane
#92
Thanks. It's working great !! Thats a really sweet valve I found, works really well and with the stainless guts it'll outlast others. There's a pic of the invoice in a past post of mine showing the valve, got it off EBay. Good luck with your install !!!
#93
dave, thinking about building this setup, I've got everything lying around except the solenoid's and the adapter to get my Regulator to the LP tank. Question, what PSI are you feeding your engine? I am thinking about running 2 solenoids, One on the tank side, and one in the engine bay. The arming switch will power both solenoids, but the Solenoid close to the engine will be activated by a 2-4 psi Hobbs switch that way there is only 2-3 feet of hose to fill when the solenoid opens, and once armed it will only kick on when i hit 2-4 PSI (have to decide where ill set it)
#94
dave, thinking about building this setup, I've got everything lying around except the solenoid's and the adapter to get my Regulator to the LP tank. Question, what PSI are you feeding your engine? I am thinking about running 2 solenoids, One on the tank side, and one in the engine bay. The arming switch will power both solenoids, but the Solenoid close to the engine will be activated by a 2-4 psi Hobbs switch that way there is only 2-3 feet of hose to fill when the solenoid opens, and once armed it will only kick on when i hit 2-4 PSI (have to decide where ill set it)
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
05-05-2015 08:50 AM