Diesel Bombers
Share Your Pictures with Our Community. Upload Now
Waiting for my clutch kit(tomorrow hopefully) so I can get this party started.
Waiting for my clutch kit(tomorrow hopefully) so I can get this party started.
0 2019/02/26 19:07:12
Spacer installed between bellhousing and gearbox.
Spacer installed between bellhousing and gearbox.
0 2019/02/26 19:06:34
0 2019/02/24 09:02:18
Renault 2.1td
Renault 2.1td
0 2019/02/23 16:13:50
Yes, it really is a turbo diesel.
Yes, it really is a turbo diesel.
0 2019/02/23 16:13:01
The daily driver
The daily driver
0 2019/02/23 16:12:16
Original bad idea. I cut the "flange" off the Mitsubishi transmission from the Dodge .I was going to see if I could get it milled down to 15mm and use it between bellhousing and engine...
Original bad idea. I cut the "flange" off the Mitsubishi transmission from the Dodge .I was going to see if I could get it milled down to 15mm and use it between bellhousing and engine...
0 2019/02/22 05:59:09
Here's the plate. Input shaft seal is here, and the back side will be sealed to the gear box.
Here's the plate. Input shaft seal is here, and the back side will be sealed to the gear box.
0 2019/02/22 05:47:24
Hard to see but here I put sleeves in the 4 corner bolt holes so it stays aligned.
Hard to see but here I put sleeves in the 4 corner bolt holes so it stays aligned.
0 2019/02/22 05:40:08
Spacer plate and bellhousing
Spacer plate and bellhousing
0 2019/02/22 05:39:39
Oil pan and bellhousing that are required to fit
Oil pan and bellhousing that are required to fit
0 2019/02/22 05:35:21
G6(b2600i) engine is out!
G6(b2600i) engine is out!
0 2019/02/22 05:35:08
Advertisement
Cutting the backside out of the 2600i bellhousing to make a spacer plate
Cutting the backside out of the 2600i bellhousing to make a spacer plate
0 2019/02/22 05:30:35
Spacer plate mounted to core transmission so grinding of face can take place, and the areas where the bolt heads rest are still the original height(needed to keep the bellhousing flush) and everything else on that side is below the bolt head locations.
Spacer plate mounted to core transmission so grinding of face can take place, and the areas where the bolt heads rest are still the original height(needed to keep the bellhousing flush) and everything else on that side is below the bolt head locations.
0 2019/02/22 05:30:30
Transmission spacers 'plate'
Transmission spacers 'plate'
0 2019/02/22 05:26:27
I need to modify my oil pickup tube and this is how it needs to be.
I need to modify my oil pickup tube and this is how it needs to be.
0 2019/02/22 05:26:22
The donor: 1985 Dodge ram 50 with Mitsubishi 4d55t engine
The donor: 1985 Dodge ram 50 with Mitsubishi 4d55t engine
0 2019/02/22 05:24:44
Modified oil pickup tube
Modified oil pickup tube
0 2019/02/22 05:21:13
Engine ready to have pan installed
Engine ready to have pan installed
0 2019/02/22 05:21:07
The patient: 91 Mazda b2600i
The patient: 91 Mazda b2600i
0 2019/02/22 05:00:31
0 2019/02/16 21:44:23
0 2019/02/16 21:37:18
Or hell this is the best advice for you
Or hell this is the best advice for you
0 2019/02/14 09:21:26
0 2019/02/13 19:56:36
0 2019/02/13 19:54:55
0 2019/02/12 20:53:45
0 2019/02/12 20:53:27
0 2019/02/12 20:10:21
0 2019/02/12 19:58:46
0 2019/02/12 19:57:40
0 2019/02/12 19:55:04
0 2019/02/12 19:46:16
Advertisement