ok so i have ts6 with the chip its got a heavy bluish white haze
<iframe width="560" height="315" src="http://www.youtube.com/embed/bIeGB71GxkA" frameborder="0" allowfullscreen></iframe>

vid2
<iframe width="420" height="315" src="http://www.youtube.com/embed/6WMlpU5uJIM" frameborder="0" allowfullscreen></iframe>



without the chip i have no haze and nice smooth idle
<iframe width="420" height="315" src="http://www.youtube.com/embed/m2KgVfExEf8" frameborder="0" allowfullscreen></iframe>


any ideas im gonna get fp gauge soon as i can and a rebuild kit too...

 

YouTube - Broadcast Yourself

Ts back in loadin up - YouTube

YouTube - Broadcast Yourself

 

Need to pull codes, sounds like you have a dead miss... When you remove the chip does it run fine?

Did you get a chip with single shot tuning on it?

 

thanks for the fix on the vids, with removed its smoother but seems to be higher idle, ill try too get scanned soon same chip as before just seemed too slowly come on... yea i cant really remember it happening all the sudden at all... im wantin a contribution test right?

 

Yes, that would help. Who did your injectors?

 

i rebuilt em new stock plunger and barrel with 80 percent nozzles, electrically they were good but im almost wonderin if i didnt have a bad poppet valve oil side on one...

 

How long have they been installed?

The white haze is from low ICP pressures at idle with the 80% nozzle. But it sounds like you have a bad injector or three...

 

Bout 2k if I got custom tunes do u think it help? Why would it run better without than with chip?

 

Its hard to say...

You could chat with PHP and see what they think. What ever tuner you pick make sure you explain exactly what you have injector wise.

Check to make sure everything is installed and plugged in properly. Can you run a buzz test?

 

Yea soon as I can get back too my buddy's shop, does anyone do free reburns once u buy customs without buyin chip from them?