Ok so in the semi near future I'm going to be doing some upgrades. My question is which should I do first? Injectors, HPOP, or turbo? For injectors i'm looking at either stage 1's or a mild stage 2. Where should I get them? For the HPOP, I'm not entirely sure, adrenaline? Or do I even need one. And for the turbo, I'm looking at the H2e or the WOP QSSB. I will be getting gauges before I do these mods. Any input is appreciated.

 

with stage 1's you wont need the HPOP or turbo. if you go with stage 2's you will need the turbo and HPOP to the best of my knowledge. I would go Injectors, turbo, HPOP if it was me. ive heard the adrenaline is good, ive also heard that the terminator T500 is another good one. turbo i have no idea,but i noticed you did the EBPV mod onyour truck, with an aftermarket turbo you will lose that.

 

Ok, right now my pickup has about 155k. So my HPOP should be good. I haven't put a gauge yet but it's not showing signs of being weak. So do injectors, turbo, HPOP in that order? and as for the EBPV break, I know I'm going to lose it. But I can always get an inline and put it in the down pipe.

 

thats the order im going to go with and thats what makes since to me. idk how long an HPOP is suppost to last but it should be fine. i have 170K on mine and its perfectly fine.

 

I think it depends on how well the engine was maintained. But I could be wrong. I was thinkg about doing turbo, then HPOP, then injectors. Mainly because the bearings in my turbo are getting pretty loose.