boost seems low to me???
#12
I would just attach it using one of the boots. So whatever diameter the boot is, that's the size PVC you want. I used to have a picture but I just looked for it and I must have deleted it.
See my orange boot, I would attach it to that or go further and attach it to the intake boot. Whichever you want.
See my orange boot, I would attach it to that or go further and attach it to the intake boot. Whichever you want.
#14
#15
Other then that check for boost leaks like James showed earlier.
#16
Is your truck an automatic? It will drop a little during a shift but not much. If its a manual, You start back at square one every time you shift.
#17
#18
I'm in the same boat as you, just hooked up a boost gauge finally and found I'm only making 5-10psi. Picked up a manual gauge and confirmed it to be correct.
You can make a boost leak tester yourself with some Fernco Plumbing couplers, car tire valve stem, and a pvc endcap from a hardware store. I've done this plenty of times with my turbo cars. Just make sure to regulate the supply going in.
You can make a boost leak tester yourself with some Fernco Plumbing couplers, car tire valve stem, and a pvc endcap from a hardware store. I've done this plenty of times with my turbo cars. Just make sure to regulate the supply going in.
#19
#20