Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

Ran outta fuel cant get it back started

Thread Tools
 
Search this Thread
 
  #1  
Old 01-14-2010 | 02:03 AM
Cotton's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2010
Posts: 34
Likes: 0
From: Georgia
Default Ran outta fuel cant get it back started

my truck is a 2002 f-250 and i thought i had enough fuel to make it to town but it started cuttin up at the end of my dirt road and died out and ive put more fuel in it i just cant run it cranks but just want fire any ideas? i need help fast. this is my work truck
 
  #2  
Old 01-14-2010 | 03:21 AM
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

How much fuel did you put in it?

Turn the key on and you will hear the fuel pump turn on, wait until it turns off and repeat... Do this about 5 times, then open the hood, turn the key on and open the drain valve to see if the fuel bowl is full.


turn key and start... Drive on and dont let the damn thing below a 1/4 tank.
 
  #3  
Old 01-14-2010 | 12:21 PM
Cotton's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2010
Posts: 34
Likes: 0
From: Georgia
Default

i put prolly 5 gallons in it but im gonna go get 5 more in a few min. and no after this it will never get below a 1/4 of a tank
 
  #4  
Old 01-14-2010 | 04:02 PM
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Need to get a set of jumper cables on it too, its going to be low if you have cranked on it for a while.
 
  #5  
Old 01-14-2010 | 07:45 PM
Cotton's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2010
Posts: 34
Likes: 0
From: Georgia
Default

Originally Posted by CSIPSD
Need to get a set of jumper cables on it too, its going to be low if you have cranked on it for a while.
ok i tried to get it started again earlier but im thinking now that i got a bad cam postioning sensor cause the rpm gauge aint moving when im trying to crank it
 
  #6  
Old 01-14-2010 | 08:18 PM
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

2002 does not move when cranking... One of the things they changed with the 2002 and newer PCM's...

Have you checked the fuel bowl?
 
  #7  
Old 01-14-2010 | 08:24 PM
greenmonster's Avatar
Diesel Fan
Joined: Dec 2009
Posts: 12
Likes: 0
From: Xenia,Ohio
Default

Check and make sure ur gettin 12volts it will crank but doesnt mean u got 12 it will not start under 12
 
  #8  
Old 01-14-2010 | 08:27 PM
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Originally Posted by greenmonster
Check and make sure ur gettin 12volts it will crank but doesnt mean u got 12 it will not start under 12


It will start under 12v, but it does need good voltage... Thats why I mentioned getting some jumper cables!
 
  #9  
Old 01-14-2010 | 09:53 PM
Cotton's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2010
Posts: 34
Likes: 0
From: Georgia
Default

yeah i checked the fuel bowl its fuel in it
 
  #10  
Old 01-14-2010 | 10:15 PM
Thelilbluedodge's Avatar
Diesel Fan
Joined: Jan 2010
Posts: 10
Likes: 0
From: Austin, Texas
Default

Im a dodge guy but we use Fords at work so here we go. We went through this with our trucks as well on every 2000-02 we had and it turned out to be either a throttle positioning sensor or a cam positioning sensor (cant remember which) even with fuel in the bowl they wouldnt start. Well turns out it was a recall by Ford and they fixed them for us so that might be worth a shot.....hope you get it started and hope this helped
 

Last edited by Thelilbluedodge; 01-14-2010 at 10:27 PM.


Quick Reply: Ran outta fuel cant get it back started



All times are GMT -5. The time now is 06:38 PM.