Water Meth??
#2
Most water/meth controlers are boost referace, above your preset boost point the water comes on. Some also have a EGT referance as well.
I have my first stage set to come on at 10psi and second stage at 25psi. I dont like the EGT based systems, because there is always a chance of spraying when you dont have boost which can cause issues with hydrolocking.
Water/meth should not be looked at as a HP boost like nitrous, its better to look at it as a added intercooler.
I have my first stage set to come on at 10psi and second stage at 25psi. I dont like the EGT based systems, because there is always a chance of spraying when you dont have boost which can cause issues with hydrolocking.
Water/meth should not be looked at as a HP boost like nitrous, its better to look at it as a added intercooler.
#4
They all have controlers with the kits, I prefer coolingmist to snows. Cooling Mist has better pumps, better nozzles and better controlers. Its just a better kit and much better people to work with.
Water Injection, Methanol Injection, Alcohol Injection Systems | Coolingmist
#5
#6
#7
On a PSD, keep it below 40% meth unless you want to see what the inside of the block looks like.
Thread
Thread Starter
Forum
Replies
Last Post
Lawrence D. Sanders Sr
5.9 Liter CR Dodge Cummins 03-07
3
12-16-2014 11:52 PM