Glow plug and air intake heater relays. I would greatly appreciate it if sombody could send some photos of their their relays so I can figure out how to wire mine. I know that the two large wires from the battery get installed on one big terminal of each relay and that the yellow/brown mid-sized wire goes to the other side of the glow plug relay but after that I'm lost. The remaining wires for the glow plug relay are two small solid red and then a small yellow wire, I assume they are for this relay because they will not reach the air intake heater relay. Moving to this relay I have one small purple, one small solid red and then a small red with a yellow strip. The other large red wire that would normally go to the intake was taped up and tucked away because the intake has a plug in it. Again I would great let appreciate the photos. PS: looked online for hours and couldn't find anything and international told me to get all data but I did that last time and they show nothing.