I replaced the fpr on the fuel bowl after replacing the hpop and my truck will crank and run for about 2 seconds but it will not stay running. Most the time I think it's running off the eather being sprayed in the filter but not sure why it's not geting fuel and staying running. Some tips would be great.

 

Are you getting fuel at the injectors? crack a line you probably have air from the filter change.

I am not up on the powerstoke set ups but i would check for fuel at the pump and the filter bowl and the injectors.

 

It's suposed to purge the lines on it's own but the bateries are dead so when I Hooke it up to another truck it'll crank but I can never hear the little motor that purges the lines.

 

any ford guys out there got any tips?
Bump