just bought a 2000 powerstroke drove home no problems and parked it in the garage and went out the next day and would not start and was plugged in all night. put new cps, and idm, buzzed tested all injectors and they are all good and fuel pressure is good. I am all out of ideas what else should I do? not sure how the guy I got it from started it.

 

Fuses good?

 

yup no bad fuses also cranks fine and batts. are ok just wont fire

 

Any codes? How's ICP?

 

no codes icp working like it should

 

I am new to the ps diesel not sure what all your codes are

this is what happend to mine the day i got it plugged it in and went to start it the next am nothing found i had 1 bad batt and my block heater needed replacement you can check it with an ohm meter at the plug

i did a lot of research and the one thing I haven't heard said is does your glow plug light come on and have you checked all your glow plugs and relay

 

block heater works and glow plugs tested good and wts light comes on. I was thinking the ipr would that make sence.

 

ipr would that be injection pump relay if so that would be a good start

 

There in no injection pump on any power stroke. IPR is injection pressure regulator

 

so does this work off the high pressure oil pump then