help with rim size
#1
help with rim size
im buying a set of rims and tires as we speak ive got about a week to decide what exact ones im gonna get. I have a set of 20X9 with a -12 offset or a 4.5 backspacing with a set of 35X12.5X20 these are going on a 2002 F250 with a zone 2.5 front leveling kit and a 1"add a leaf in the back. im thinking that I might wanna upgrade my order to 22X12 with the same tires 35X12.5X22 I don't know if the extra 3 inchs on the face of the rim will hurt me or not please help.
#2
#4
So I'm looking at 325/50/22 ro go on which is roughly 12 3/4 wide will this not look right or do I need the 345 which is 13.5 will that wide of a wheel fit my truck with the minimal lift I have also this is a city slicker truck will almost never see any rough driving. Mud and sand and the most
#5
#6
#7
What's the lift again
Sent from my iPhone using Tapatalk - now Free
---AutoMerged DoublePost---
Honestly it's gonna be close 35's are gonna rub in general... You may wanna rethink all of this
Sent from my iPhone using Tapatalk - now Free
Sent from my iPhone using Tapatalk - now Free
---AutoMerged DoublePost---
Honestly it's gonna be close 35's are gonna rub in general... You may wanna rethink all of this
Sent from my iPhone using Tapatalk - now Free
Last edited by EvanBoothe; 10-20-2013 at 01:24 PM. Reason: Automerged Doublepost
#8
its a zone 2.5 inch in the front that someone said is more like 3.5 its a spring pack that adds on to the stock leaf. and a rough country 1" add a leaf in the rear that supposedly is more like 2 I don't know these numbers personaly as I am gonna have the lift installed when I get the wheels because I don't wanna run around with my stocks on a lift no matter if its a huge one or not..
#9