how can i gain horse power in a early 99 f350
#1
how can i gain horse power in a early 99 f350
hey just wanted to ask you guys what u think i have a sct programmer that im about to get tunes from innovative diesel, a bullydog air intake and about to putt 8 inch stacks other then that its stock whats the best and cheapest way to get horse power.and also what do u guys think about stacks. thanks guys
#3
stacks suck! Get a 5" exhaust or at the very least do a muffler delete.There is nothing like scrubbing soot off a white travel trailer or race car.The best chip is a php custom tuned one,$300 some guys like tony wildman,he uses the same hardware but is $100 more.I have a php and it corrected a weird shifting issue and speedometer.
With the chip,my flo-pro 5" exhaust and a open air filter this truck with a 8" lift and 37s will get sideways like a mustang. GET GAUGES FIRST-not gayshifts either
With the chip,my flo-pro 5" exhaust and a open air filter this truck with a 8" lift and 37s will get sideways like a mustang. GET GAUGES FIRST-not gayshifts either
#5
Injectors would be the next step then... Do some research. Plenty of information on here about them...
https://www.dieselbombers.com/99-03-...tml#post528193
I run Full Force diesel injectors... Rosewood or Swamps are other good choices...
Depending on what injector you want to go with will dictate what other mods are needed... a good daily driver injector is a 160cc... That's what I run and have run for a couple years now.
For gauges, At the very least you need an EGT gauge to keep an eye on engine temps... I would recommend Autometer or isspro gauges...
https://www.dieselbombers.com/99-03-...tml#post528193
I run Full Force diesel injectors... Rosewood or Swamps are other good choices...
Depending on what injector you want to go with will dictate what other mods are needed... a good daily driver injector is a 160cc... That's what I run and have run for a couple years now.
For gauges, At the very least you need an EGT gauge to keep an eye on engine temps... I would recommend Autometer or isspro gauges...
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
12-07-2015 01:09 PM
1ATony
1A Auto Parts
1
10-29-2015 02:11 PM
1ATony
1A Auto Parts
1
10-26-2015 02:44 PM
1ATony
1A Auto Parts
0
09-02-2015 01:24 PM
1ATony
1A Auto Parts
0
09-02-2015 01:03 PM