Scrounged up a track bar, bolts and the upper frame bracket from a 2003 f250 SD. As I understand all I need to do is drill out the lower bracket with a 13/16" bit and all will bolt in.

Am I forgetting something or is it as easy as it sounds?

 

sounds about right. might have a hard tim getting the drill in there tho...

 

hey smoke pole did that work?? im haven some emergency issues i broke leaf springs on driver side and it cost like 325 for used springs from a salvage yard or for another $50 i was able to get new set of 4" leafs but haven problems with track bar mount and track bar