stuck in diagnostics
#1
stuck in diagnostics
1996 Ford 350 7.3 turbo engine starts and runs fine for about 45 minutes or until it reaches operating tempature. It kills will not restart until cool down. the proccesser or computer will not let me read datastream and keeps giving me all kinds of different codes like cam sensor or injection control sensor. have allready replaced ICP. I think its the computer can any one help or cofirm?:
#2
#3
#4
#5
#6
yea I get some responses from the obd port it reads codes but tells me that it had a failure to communicate but when i back out of that screen and go back in the codes appear. but when i try to read datastream i get a blank screen I think it is the PCM well i know its bad because its not doing what it is suppose to. I couldn`t fine that old pcm so i sent it out to get rebuilt.waiting for it to get back now . I know it could be a cam sensor but i wanted to get a properly functioning pcm first. but i do still think i have other problems. ow and my scanner is the snap-on modus
#7
#8
yea that`s what i said. don`t trust the pcm but the trucks got multiple problems
---AutoMerged DoublePost---
anyway under the hood of my buddies 04 **** 5.9 got fuel from the supply pump but nothing out the high pressure pump at the rail any thoughts
---AutoMerged DoublePost---
anyway under the hood of my buddies 04 **** 5.9 got fuel from the supply pump but nothing out the high pressure pump at the rail any thoughts
Last edited by matthew2-4-u; 07-20-2012 at 01:14 PM. Reason: Automerged Doublepost