Ford Powerstroke 94-98 7.3L Discussion of 94-98 7.3 Liter Ford Powerstroke Turbo Diesels

1996 f350 bogging issue

Thread Tools
 
Search this Thread
 
  #1  
Old 04-07-2012, 01:13 PM
charlesheck's Avatar
Newbie
Thread Starter
Join Date: Mar 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 1996 f350 bogging issue

1996 f350 7.3 , 5 speed 350,000 miles
When I take off hard in first it bogs and blows hard blue smoke. Shifting into 2nd it takes off strong and blows black smoke. It also seems weak when pulling a trailer up mountains when the rpms get lower.
The truck uses very little oil. The smoke smells like diesel and burns my eyes. It also smells the same in the morning before warmup. Under normal driving conditions it runs fine without smoke or bogging.

New map sensor, Ipc sensor, fuel filter.
Very little turbo wheel play.
No idea about injector life.
Engine appears to be rebuilt.

Any ideas?
 

Last edited by charlesheck; 04-07-2012 at 02:09 PM.
  #2  
Old 04-07-2012, 10:42 PM
97t444e's Avatar
Diesel Enthusiast
Join Date: Feb 2012
Posts: 363
Received 5 Likes on 5 Posts
Default

sounds like injectors to me, i just replaced mine after 330,000 miles and it cured it. I had the same symptoms and it would smoke blue really bad in the morning when cold and sometimes have a blue haze when at op temp when idleing it also could be injector orings, i had mine really fail about a year ago and it smoked blue really bad and would bog really bad but it also used alot of oil when that was going on so it sounds more like injectors to me
 
  #3  
Old 04-08-2012, 11:47 AM
charlesheck's Avatar
Newbie
Thread Starter
Join Date: Mar 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

So I found a burnt connector on the back right valve cover on the drivers side
 
  #4  
Old 04-08-2012, 01:31 PM
fordornothing's Avatar
Diesel Bomber
Join Date: Jul 2010
Location: Hays, KS
Posts: 3,884
Received 144 Likes on 111 Posts
Default

replace the vc gasket. check the other side too.
 
  #5  
Old 04-08-2012, 03:39 PM
charlesheck's Avatar
Newbie
Thread Starter
Join Date: Mar 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

The other side looks ok on the outside. Im going to take both valve covers off and see how bad the insides are. Im looking for a diagram of the pins to figure out if its a glowplug or injector wire that burned. I noticed both plugs were oily
 
  #6  
Old 04-09-2012, 06:16 PM
fordornothing's Avatar
Diesel Bomber
Join Date: Jul 2010
Location: Hays, KS
Posts: 3,884
Received 144 Likes on 111 Posts
Default

well when you pull the VC's you'll be able to tell. just folow the wires.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cramage28
Ford Powerstroke 03-07 6.0L
4
09-20-2015 11:37 AM
Ric Stokes
Ford Powerstroke 03-07 6.0L
2
09-11-2015 01:29 PM
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
85IDI_International
12 Valve 2nd Gen Dodge Cummins 94-98
2
04-24-2015 01:08 AM
UniqueCopy
Ford Powerstroke 94-98 7.3L
2
12-14-2014 11:37 AM



Quick Reply: 1996 f350 bogging issue



All times are GMT -5. The time now is 04:45 PM.