Boost psi with stage 1s
#8
yes. i'm not sure what the defuel point is on the OBS, on the SD's it's 20-22. mine is 21 psi. the engine is good for about 40 psi with no studs. - it's not the boost pressure that will damage a stock turbo, but the back pressure/ drive pressure (exhaust side of the turbo) that loads the stock bushing setup that leads to failure. - thanks to CSIPSD for this last segment.
#9
#10
NO one should unplug the MAP sensor. Your computer can not fuel the truck properly without it hooked up.
What size stage 1's... Calling an injector a stage 1 is just dumb...
What CC and what nozzle size.
What size stage 1's... Calling an injector a stage 1 is just dumb...
What CC and what nozzle size.