Diesel Bombers

Ford Powerstroke 94-98 7.3L Discussion of 94-98 7.3 Liter Ford Powerstroke Turbo Diesels

Manual Transmission

   
Old May 20, 2011 | 09:38 PM
Share
  #1  
Travistrent1993's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 50
Likes: 1
From: Arkansas
Default Manual Transmission
Do you need to monitor tranny temp on manual transmission? If so, do they have a plug you can just hook up to a gauge? I've ordered a chip and am trying to figure out if I need that gauge or not?

Thanks
 
Reply
0
Old May 21, 2011 | 05:07 AM
Share
  #2  
joebob3093's Avatar
Moderator
Joined: Jul 2008
Posts: 2,558
Likes: 138
From: Powell Butte, OR
Default Re: Manual Transmission
It is not needed. You can watch it but its not one that's needed. If you want to watch it you can drill and tap the PTO cover and put the sensor there.
 
Reply
0
Old May 21, 2011 | 04:40 PM
Share
  #3  
Travistrent1993's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 50
Likes: 1
From: Arkansas
Default
Is it recommended or is that really just for auto trans? And if not, is fuel pressure something that needs to be watched? Or what other gauge would u recommend besides pyro and boost?
 
Reply
0
Old May 21, 2011 | 04:58 PM
Share
  #4  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default
High Pressure Oil Pump
 
Reply
0
Old May 22, 2011 | 09:52 AM
Share
  #5  
Travistrent1993's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 50
Likes: 1
From: Arkansas
Default
How do you hook that gauge up?
 
Reply
0
Old May 22, 2011 | 06:35 PM
Share
  #6  
95powersmoker's Avatar
BOMBARDIER
Joined: Mar 2010
Posts: 2,959
Likes: 187
From: Ellensburg, WA
Default
If you're looking for a 3rd gauge to put in a pod, Scan gauge... It reads everything your PCM see's and displays it in a 2 1/16" gauge for you...
 
Reply
0
Old May 22, 2011 | 09:17 PM
Share
  #7  
Travistrent1993's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 50
Likes: 1
From: Arkansas
Default
Just wondering... I'm kinda new to all this but what do you watch the PCM for? Does it show codes or run diagnostics? And are they more expensive?
 
Reply
0
Old May 22, 2011 | 09:39 PM
Share
  #8  
95powersmoker's Avatar
BOMBARDIER
Joined: Mar 2010
Posts: 2,959
Likes: 187
From: Ellensburg, WA
Default
Originally Posted by Travistrent1993
Just wondering... I'm kinda new to all this but what do you watch the PCM for? Does it show codes or run diagnostics? And are they more expensive?
The PCM is the trucks computer... All the inputs it sees are sometimes nice to see yourself...

The gauge also scans for codes and does cylinder contribution tests and buzz tests...

Just a thought.
 
Reply
0
Old May 22, 2011 | 11:56 PM
Share
  #9  
Travistrent1993's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2011
Posts: 50
Likes: 1
From: Arkansas
Default
What about fuel pressure?
 
Reply
0
Old May 23, 2011 | 10:32 AM
Share
  #10  
95powersmoker's Avatar
BOMBARDIER
Joined: Mar 2010
Posts: 2,959
Likes: 187
From: Ellensburg, WA
Default
You can get a fuel pressure gauge if you want... The problem is that the pressures bounce around a lot and it won't be long before you kill a sender which aren't cheap parts...
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 04:30 PM.