96 f250 7.3 no crank no turnover
#1
96 f250 7.3 no crank no turnover
96 ford f250 7.3L powerstroke
i had a problem where when i turned the key there was no crack and the motor would not turn over..i replaced the starter selenoid and that problem went i away.. at least i thought it did but the problem came back i am getting power inside as far a lights and radio dash all that just when i turn the key she doesnt budge at all no crank no turn no noise at all.. appreciate the help..
i had a problem where when i turned the key there was no crack and the motor would not turn over..i replaced the starter selenoid and that problem went i away.. at least i thought it did but the problem came back i am getting power inside as far a lights and radio dash all that just when i turn the key she doesnt budge at all no crank no turn no noise at all.. appreciate the help..
#6
When you turn the key does it just click?
If all your fuses are good, take a screw driver and jump the starter solenoid. If still nothing, i would say its your starter.
I had this happen about a week ago. Take your starter off the truck and run it down to O'rielly's and have them bench it.
If all your fuses are good, take a screw driver and jump the starter solenoid. If still nothing, i would say its your starter.
I had this happen about a week ago. Take your starter off the truck and run it down to O'rielly's and have them bench it.
#7
No click no noise I turn the key to crank the motor and nothing happens.. The starter solenoid is on the starter or on the inner fender?.. Do I just turn the key til the wts turns on then I try to short it or do I need to have someone crank the key
---AutoMerged DoublePost---
so i tried to short the starter selenoid and i heard a click..
---AutoMerged DoublePost---
so i tried to short the starter selenoid and i heard a click..
Last edited by robsford; 01-20-2011 at 08:47 PM. Reason: Automerged Doublepost
#9