7.3 ghost start
#1
#3
#4
#6
it was the small connector on the starter.....electrical taped it up for now, cranks over just like it should but now wont start. checked codes and there were a couple but nothing that shouldnt let it start. Fuel is getting to the filter housing but wont fire. Checked ICP sensor and looks fine and so does the connector and wires.
#8
We cranked for about 10 seconds a time for about 5 minutes in fear of frying the starter. Do you thinkn we need to just simply crank more? It wasnt even huffing white smoke or even popping like it was trying, just cranking...codes i got off it are
P0198 EOT Sensor Circuit High Input
P0472 Exhaust Back Pressure Sensor Circuit Low Input
P1280 ICP Circuit Out of Range Low
p1661 Output Circuit Check Circuit Low Input
P0198 EOT Sensor Circuit High Input
P0472 Exhaust Back Pressure Sensor Circuit Low Input
P1280 ICP Circuit Out of Range Low
p1661 Output Circuit Check Circuit Low Input
#9
#10
Watch your oil pressure gauge while cranking. Usually it won't come up for a bit. Then it'll come up and shortly thereafter it'll fire off. If it's not building oil pressure yet then it won't be building ICP either and it won't fire. It does sometimes take awhile to get it to fire on the first start after injectors being out or heads being off.