My First/New 1994 F350 4x4 PSD
#12
Took another picture today
Just picked up new A/C compressor/drier and one other peice that I can't remeber the name of now as the old a/c compressor is leaking freeon and with summer coming up in florida, need the ICE COLD A/C!!!
Also going to order my new clutch bushings thursday after-noon. Then save up for a Tymar intake and 3" DP to 4" Straight either all the way back or just before rear tire, not sure yet.
Just picked up new A/C compressor/drier and one other peice that I can't remeber the name of now as the old a/c compressor is leaking freeon and with summer coming up in florida, need the ICE COLD A/C!!!
Also going to order my new clutch bushings thursday after-noon. Then save up for a Tymar intake and 3" DP to 4" Straight either all the way back or just before rear tire, not sure yet.
#13
Nice Truck!
I had a straight pipe out just before the rear tire. Changed to all the way back because that wheel and corner of the truck was ALWAYS dirty. Yours is much too pretty for that! I bought a tailpipe for mine since I already had it back that far. (The tailpipe goes over the rear axel and out the side.) $100 for tail pipe, $100 for down pipe, might as well spend $300 and get the complete straight pipe system. In the end, probably the same price, and way easier to install. The kits I've seen use existing factory hangers.
I had a straight pipe out just before the rear tire. Changed to all the way back because that wheel and corner of the truck was ALWAYS dirty. Yours is much too pretty for that! I bought a tailpipe for mine since I already had it back that far. (The tailpipe goes over the rear axel and out the side.) $100 for tail pipe, $100 for down pipe, might as well spend $300 and get the complete straight pipe system. In the end, probably the same price, and way easier to install. The kits I've seen use existing factory hangers.
#18
#19
#20
My list of modification's to come:
Get injectors rebuilt(soon)
South Bend Clutch or Valiar
35's on 16" KMC XD Hoss black wheels
DIY Intake(soon)
3" DP to 4" straight all the way back with probley 5" tip(tip will come later on)
Repaint and clear coat factory color
Heavy duty front/rear bumpers
Adrenaline HPOP
TS chip with TW tunes or SCT X3 or custom chip from Tim at P.I.S.
4 gague pillar pod(where to get one??)
with Pyro/Boost/Oil Psi/Fuel Psi
Air Dog 150 fuel water and air seperator
ATS Intercooler kit
---AutoMerged DoublePost---
Took a couple interior pic's today:
Get injectors rebuilt(soon)
South Bend Clutch or Valiar
35's on 16" KMC XD Hoss black wheels
DIY Intake(soon)
3" DP to 4" straight all the way back with probley 5" tip(tip will come later on)
Repaint and clear coat factory color
Heavy duty front/rear bumpers
Adrenaline HPOP
TS chip with TW tunes or SCT X3 or custom chip from Tim at P.I.S.
4 gague pillar pod(where to get one??)
with Pyro/Boost/Oil Psi/Fuel Psi
Air Dog 150 fuel water and air seperator
ATS Intercooler kit
---AutoMerged DoublePost---
Took a couple interior pic's today:
Last edited by Bad93Cummins; 04-18-2010 at 03:46 PM. Reason: Automerged Doublepost