Simple upgrades
#1
Simple upgrades
Hey i just got a 97 f250 and im looking to do some simple upgrades to get more power. i have the intake and gettin the exhaust. any other suggestion and eplain how to do it would help alot. i have been around a few of these but never upgraded them just replaced stock part. need some help from the pros.
#2
#6
then im going to put my powerstroke in my dodge.
---AutoMerged DoublePost---
Will youexplain this alittle better please. i dont understand what you are talkin about
---AutoMerged DoublePost---
Will youexplain this alittle better please. i dont understand what you are talkin about
Last edited by farm boy; 05-02-2009 at 11:20 PM. Reason: Automerged Doublepost
#7
The injector driver module can have a different resistor soldered in that changes the injector voltage from 110 volts a.c. to 140 volts a.c. It makes the injectors open faster and more responsive. There's mod you can do that puts a resistor in the cam sensor wiring that changes your timing. I myself prefer to leave it to the experts. IDMs are expensive. I hear Tony Wildman chips are the way to go. I'm pleased with my Bully Dog. All you have to do is pull out the computer and insert the chip and put the computer back in. There's also some instructions on here somewhere that tellsyou how to make your own propane fumigation.
#8
#9
#10
You wont get much smoke out of the stock 90cc injectors on these trucks, if you want good power skip generic tunes with TS, bully dog, hypertech, etc and go for custom tunes from either www.totaldieselperformance.com, Swampsdieselperformance.com - powerstroke turbocharger Resources and Information. This website is for sale!, and there are a couple more out there as well. With just a chip youll see around 260 at the wheels, thats where the stock injectors will max out at