95 psd exhaust
#1
95 psd exhaust
Just need a little help with figuring out what I need exactly to put a single stack on my truck. Its a f350 single cab. previous owners cut the cat, and muffler off so its pretty loud. not a bad thing, but the boys in blue don't like it too much. anyways, I measured where they cut everything off and its 3.5 in. im not sure where to start...but I just want a single stack....any help would be greatly appreciated!
#3
#5
#7
I bought several sections of 4" pipe for my '93 from Summit. I did some cutting and welding to make the angles I needed and it came out pretty good. It's good quality pipe, my old truck has been sitting in my yard for several years and that pipe is still in good shape.
Just went on to Summit's web site. Sections of straight 3.5" x 4' aluminized pipe are $19. They have stainless pipe that would make a pretty nice stack but they only have the stainless 3.5" in 10-ft sections. You could get a 4" x 4' section of stainless pipe for $82. A single 4" stack would look a lot better than 3.5", IMO.
They have free shipping over $99. They also have angle pieces and splices to join the pipe sections together. You could probably build the whole thing for less than $200.
If you want to get the boys in blue to cut you some slack and quiet it down a little, there are lots of generic stainless mufflers on eBay. Most of them are 4" and up, though.
Just went on to Summit's web site. Sections of straight 3.5" x 4' aluminized pipe are $19. They have stainless pipe that would make a pretty nice stack but they only have the stainless 3.5" in 10-ft sections. You could get a 4" x 4' section of stainless pipe for $82. A single 4" stack would look a lot better than 3.5", IMO.
They have free shipping over $99. They also have angle pieces and splices to join the pipe sections together. You could probably build the whole thing for less than $200.
If you want to get the boys in blue to cut you some slack and quiet it down a little, there are lots of generic stainless mufflers on eBay. Most of them are 4" and up, though.
Last edited by matts156; 12-16-2013 at 05:05 AM. Reason: Add details.
The following users liked this post:
95_powerstroker (12-17-2013)
#8
I googled "tractor trailer" parts and got a couple hits in LaPorte, IN.... they shouldn't all be 45 min away. In my area, I have about 3 different parts places.... it would be nice to price compare too... because although Ford can get all you need (as most won't be in stock), you will be paying top dollar.... Get a print out of what you will need to give you a reference. Good luck guy!
The following users liked this post:
95_powerstroker (12-17-2013)
#9
Thread
Thread Starter
Forum
Replies
Last Post
avatardvr
Ford Powerstroke 03-07 6.0L
18
08-08-2019 12:38 AM
Jet A Fuel
6.7 Liter Dodge Cummins 07.5-12
3
08-03-2015 10:45 AM
Jake12valve
Diesel In Distress - Support Ticket
5
05-10-2015 11:57 PM
carid
Diesel Bombers Sponsors
0
12-12-2014 02:26 AM