Cummins guy asking ford questions.
#1
Cummins guy asking ford questions.
Alright guys. I'll start out by telling you that I know absolutely NOTHING about the 7.3L PS other than they'll run forever. I just came into possession of this thing and wanna make it run a little better it's a daily driven work truck so I need to keep it reliable. Any help will be greatly appreciated!
It a '95 with an freshly built auto trans 225k miles. And yes. The stacks were the first thing to go.
Thanks guys!!
It a '95 with an freshly built auto trans 225k miles. And yes. The stacks were the first thing to go.
Thanks guys!!
Last edited by BigBlack2011; 08-05-2012 at 11:33 PM.
#2
#3
#4
#7
Yes, i am forgetting which one it is but its an edge product i believe. I personally would skip that for some standard gauges and a ts chip... Also, you could look at getting a scangauge which is a nice digital gauge that shows what the pcm sees...
Last edited by 95powersmoker; 08-09-2012 at 09:10 AM.
#9
I would still like to know how to make the scanguage read my codes on my 97 psd... works great on my dodge. That ts chip will definitely wake it up. I went with the stock, high idle, 50, 75, 100, 140 settings, it is switch on the fly, and pretty sweet
#10
^^^^ Are you talking about the one called ScanGauge II, the rectangular one with the two-line display? Or the AeroForce brand round gauge? AFAIK, no one has been able to get any significant data from the OBS trucks with the ScanGauge II. If it's the Aeroforce brand you have, try contacting them; they should provide customer support to get your '97 to talk to it.
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
11-11-2015 10:03 AM
Diesel Bombers
Latest Automotive Industry News
0
11-04-2014 01:30 PM