6.4 roll call
#32
#33
Just getting started with the 6.4
Got a well loaded 08 Lariat in October. 98K miles. was a fleet truck from Georgia/Alabama area.
I think it's all stock , the rear fender is well dinged up.
So far: removed 4 lbs Georgia red clay.
- Deleted over 10 codes , relating to air filter, and fuel filters.
- New set of brake pads all around and flushed the brake system.
- did three oil changes to try to thin out the sludge in the pan.
- air filter , new batteries , fuel filters and some oil filters.
Trying to locate a spare tire and jack for it.
Going to get new wheels and tires.
I stacked a pallet in the bed and put three layers of 31, 4D & 8D battery cores separated by cardboard and shrink wrapped , the suspension in the rear went down by about 1/2". My neighbor and I drove it to the recycling center and turned out it was just under 3,300lbs of batteries. Truck was like.. " That all you got??". had decent acceleration , intentionally never slowed for the train tracks and it almost behaved like it was empty. My neighbor that drove with me has an 08 Dodge with the hemi and all he said was "why did I get the hemi! ".
My complaints, you can't postpone a DPF session, you ride it out and if you just turn it off it starts all over again. YES I know get the DPF delete done and rip that out. Other complaint the backup parking sensors go nuts if you have the tailgate down.
I think it's all stock , the rear fender is well dinged up.
So far: removed 4 lbs Georgia red clay.
- Deleted over 10 codes , relating to air filter, and fuel filters.
- New set of brake pads all around and flushed the brake system.
- did three oil changes to try to thin out the sludge in the pan.
- air filter , new batteries , fuel filters and some oil filters.
Trying to locate a spare tire and jack for it.
Going to get new wheels and tires.
I stacked a pallet in the bed and put three layers of 31, 4D & 8D battery cores separated by cardboard and shrink wrapped , the suspension in the rear went down by about 1/2". My neighbor and I drove it to the recycling center and turned out it was just under 3,300lbs of batteries. Truck was like.. " That all you got??". had decent acceleration , intentionally never slowed for the train tracks and it almost behaved like it was empty. My neighbor that drove with me has an 08 Dodge with the hemi and all he said was "why did I get the hemi! ".
My complaints, you can't postpone a DPF session, you ride it out and if you just turn it off it starts all over again. YES I know get the DPF delete done and rip that out. Other complaint the backup parking sensors go nuts if you have the tailgate down.
#34
2008 F250 Lariat 4x4 CCSB
Spartan tuning (standard and custom)
Spartan TCM
4" Powerstroker67 ceramic coated downpipe
5" Flo-Pro exhaust w/muffler and 6" stainless MBRP tip
No Limit Fabrication cold air intake
No Limit Fabrication CAC pipe/intake elbow (powder coated white)
EGR cooler delete
Elite head studs
Elite 71mm atmosphere (billet Precision wheel)
Air Dog II DF-165
SunCoast transmission
River City Diesel torque converter
20x9 BMF Novakanes (chrome)
305/55/20 Toyo Open Country AT/2's
Bilstein 5160 resi shocks
PMF traction bars (not currently installed)
Recon cab lights and mirror lights
641RWHP uncorrected
Spartan tuning (standard and custom)
Spartan TCM
4" Powerstroker67 ceramic coated downpipe
5" Flo-Pro exhaust w/muffler and 6" stainless MBRP tip
No Limit Fabrication cold air intake
No Limit Fabrication CAC pipe/intake elbow (powder coated white)
EGR cooler delete
Elite head studs
Elite 71mm atmosphere (billet Precision wheel)
Air Dog II DF-165
SunCoast transmission
River City Diesel torque converter
20x9 BMF Novakanes (chrome)
305/55/20 Toyo Open Country AT/2's
Bilstein 5160 resi shocks
PMF traction bars (not currently installed)
Recon cab lights and mirror lights
641RWHP uncorrected
#35
2008 F250 Lariat 4x4 CCSB
Spartan tuning (standard and custom)
Spartan TCM
4" Powerstroker67 ceramic coated downpipe
5" Flo-Pro exhaust w/muffler and 6" stainless MBRP tip
No Limit Fabrication cold air intake
No Limit Fabrication CAC pipe/intake elbow (powder coated white)
EGR cooler delete
Elite head studs
Elite 71mm atmosphere (billet Precision wheel)
Air Dog II DF-165
SunCoast transmission
River City Diesel torque converter
20x9 BMF Novakanes (chrome)
305/55/20 Toyo Open Country AT/2's
Bilstein 5160 resi shocks
PMF traction bars (not currently installed)
Recon cab lights and mirror lights
641RWHP uncorrected
Spartan tuning (standard and custom)
Spartan TCM
4" Powerstroker67 ceramic coated downpipe
5" Flo-Pro exhaust w/muffler and 6" stainless MBRP tip
No Limit Fabrication cold air intake
No Limit Fabrication CAC pipe/intake elbow (powder coated white)
EGR cooler delete
Elite head studs
Elite 71mm atmosphere (billet Precision wheel)
Air Dog II DF-165
SunCoast transmission
River City Diesel torque converter
20x9 BMF Novakanes (chrome)
305/55/20 Toyo Open Country AT/2's
Bilstein 5160 resi shocks
PMF traction bars (not currently installed)
Recon cab lights and mirror lights
641RWHP uncorrected
#36
thanks man, appreciate it. it ran a 12.2@108 on the factory turbos on fuel only.
here are pics of my baby
http://s142.photobucket.com/user/greggk13/media/IMG_1553_zpsc0ff7275.jpg.htmlhttp://s142.photobucket.com/user/greggk13/media/IMG_1552_zps868d6546.jpg.html
here are pics of my baby
http://s142.photobucket.com/user/greggk13/media/IMG_1553_zpsc0ff7275.jpg.htmlhttp://s142.photobucket.com/user/greggk13/media/IMG_1552_zps868d6546.jpg.html
Last edited by ZombieSoldier; 07-15-2013 at 11:49 AM.
#37
thanks man, appreciate it. it ran a 12.2@108 on the factory turbos on fuel only.
here are pics of my baby
IMG_1553_zpsc0ff7275.jpg Photo by greggk13 | Photobucket
IMG_1552_zps868d6546.jpg Photo by greggk13 | Photobucket
here are pics of my baby
IMG_1553_zpsc0ff7275.jpg Photo by greggk13 | Photobucket
IMG_1552_zps868d6546.jpg Photo by greggk13 | Photobucket
#39
Thread
Thread Starter
Forum
Replies
Last Post
Macster86
Ford Powerstroke 08-10 6.4L
2
07-21-2015 09:23 AM