Hey guys, im looking at leveling my 2005 F250 with a 3" in the front and 2" in the back lift, and putting 20's and 35's on it. My only problem is that im not sure if a 20"x10" wheel will work with a 35"x12.5" with out rubbing the frame, bumper etc... Any suggestions or facts on this problem would greatly be appreciated!!!!!

 

I've been told the tallest you can do is 35. I got 285's on mine and it seems like I got plenty of Clarence i. Ight go with some 315 by 35 on mine when I get my leveling kit it

 

The width is everything. Back space is pretty standard, but width, well that's another story. When I had a leveling kit on my 2003, 285 on 16X8s fit fine, probably could have gone 315s that way. However, I don't like 12.5in tires on 8in wheels, so I went to 10s. Bottomline, I don't think that tire/wheel combo would have worked without the lift. Even with the lift I moved my front bumper forward about 1.5 inches, and I can stuff the trailing edge of my wheel opening going into a parking lot if the tires are turned properly.

There are lots of guys running 35s and a leveling kit, but they are ALL on 8inch wheels or LESS.

 

I had 35x12.5 on my 99 f250 and they rubbed bad on the leaf springs

Sent from my DROID BIONIC

 

35x12.5x17 here on stock 17x7.5's, 2.5" leveling spacers up front, F350 stock blocks in the rear, no rubbing.