Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Softly Surging Under Accelleration

Thread Tools
 
Search this Thread
 
  #1  
Old 01-18-2012, 09:41 AM
Accubuck's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2011
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default Softly Surging Under Accelleration

Hey,
I gotta 04 F250 Sd 6.0 Turbo Diesel and under part throttle and wide open acceleration it seems to surge a little like the egr valve is opening and closing in waves. That may not be what is happining but it is all I can think of. Maybe its a waste gate opening and closing, but it kinda seems like it is hunting for a proper position for ideal combustion or clean air. It runs normal at steady speeds. There probably is not a broken or worn out part causing this, it could be half normal.

Any Thoughts?

O yea, I just put a high pressure oil pump on it with 2 other sensor/regulators whatever they are. One on the valve cover and one on the side of the pump in the valley.
 
  #2  
Old 01-18-2012, 09:48 AM
MillerBoyzDiesel's Avatar
Diesel Wrench
Join Date: Dec 2011
Location: Kentucky
Posts: 763
Received 39 Likes on 37 Posts
Default

so its got a new hpop and icp and ipr. The turbo isnt wastegated but you might be having probs the variable vanes in the turbo sticking.
 
  #3  
Old 01-18-2012, 10:43 AM
Mdub707's Avatar
BOMBARDIER
Join Date: Oct 2007
Posts: 8,208
Received 630 Likes on 510 Posts
Default

Sounds like sticky turbo vanes to me.
 
  #4  
Old 01-18-2012, 11:30 AM
EricC's Avatar
Diesel Enthusiast
Join Date: May 2011
Location: Pc florida
Posts: 131
Likes: 0
Received 1 Like on 1 Post
Default

Turbo needs to be clean mine did the same thing cleaned it and it's all good now!
 
  #5  
Old 01-19-2012, 04:06 PM
Accubuck's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2011
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default

You know I had my fingers all over that turbo when I put the HPOP on it, I was turning the turbo, feeling if it is smooth and not sticking and I didn't see any part of any variable vanes. Do these vanes change pitch somehow? I hate to seem ignorant, but I guess I am. I did notice that they seemed to be double finned. Now that it is installed and I am not looking at it, How could you clean it? Carb cleaner or brake cleaner? I did WD 40 it a lot to get the dirt off the intake side.
 
  #6  
Old 01-19-2012, 04:26 PM
MillerBoyzDiesel's Avatar
Diesel Wrench
Join Date: Dec 2011
Location: Kentucky
Posts: 763
Received 39 Likes on 37 Posts
Default

you have to seperate the exhaust housing from the turbo and clean the vanes and unison ring inside the housing
 
  #7  
Old 01-20-2012, 08:24 AM
Mdub707's Avatar
BOMBARDIER
Join Date: Oct 2007
Posts: 8,208
Received 630 Likes on 510 Posts
  #8  
Old 01-31-2012, 02:42 PM
fixorepair's Avatar
Diesel Fan
Join Date: Sep 2011
Location: Ada,OH
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Default

mine did same thing pull the turbo break it in half clean it reinstall and your surging is gone
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
john grossman
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
01-12-2019 08:58 PM
boneheaddoctor
Chevy/GMC 6.2L and 6.5L
9
01-15-2016 06:19 PM
MIKE3822
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
11-04-2014 07:34 AM
Jclamorgan
5.9L 24V Performance
3
09-27-2014 09:47 AM



Quick Reply: Softly Surging Under Accelleration



All times are GMT -5. The time now is 03:27 AM.