Low Rpm at start
#51
#52
Just wanted to update on my truck. Got a new ficm from mike and put it on and it took care of my problem. Starts up great everytime. Just to let anybody know that was reading this that I had tested my ficm before and it read 48 volts through all tests. So just because it reads fine dosent mean its not the problem. Mike you the man and I will be letting everybody I know about you rebuilding ficms. Very professional! I hope now I can start posting about performance and exterior upgrades instead of problems!
The following users liked this post:
Mdub707 (12-13-2011)
#53
#54
Dont cringe to much but guess what.... Its doin it again!! Its weird this time tho. Before when I was having it do this it would sound like a big ole bag of poo and it acted like it didnt want to move, just had no power. Now when its doing it its only in the morning after I have had it plugged in and as soon as its done having its seizure it runs fine and I go on my merry way. Im do to do an oil change soon and im gonna go ahead and change the fuel filters as well since I dont know if they have ever been changed. I do remember tho when replacing the ficm one of the 3 connectors was a big pain in the ***. I might have to get in there and check to see if it came loose or somethin. Just givin you the heads up that I might have destroyed another ficm. Let you know whats up. Will check the voltage as well.
#55
Could just be injectors on it's way out too bud. An oil change and a bottle of Rev-X might help tremendously.
Mine has recently started acting similar to what you're saying, and all the FICM's I'm swapping on and off aren't fixing it. I think I'm starting to develop a slight high pressure oil leak too, since at WOT, my desired ICP is ~3950psi and my actual is only 3600psi.
Let us know what you find with the FICM for sure.
Mine has recently started acting similar to what you're saying, and all the FICM's I'm swapping on and off aren't fixing it. I think I'm starting to develop a slight high pressure oil leak too, since at WOT, my desired ICP is ~3950psi and my actual is only 3600psi.
Let us know what you find with the FICM for sure.
#56
I really dont wanna replace injectors . I wanted to ask you about an oil leak to and didnt want to start a new thread. I do have an oil leak at the very front of the block. I can see where the oil drips off of, it looks like a plug, but not sure where it is actually coming from. It drips down onto my track bar. Makes it look all nasty and gets all over ya when your crawlin around under it. Not sure if that could be contributing to some of my problems. Dont see any other leaks except right there. I will still be checkin ficm, and doin the maintenance here soon tho.
#57
Thread
Thread Starter
Forum
Replies
Last Post
Josh Chretien
5.9L 12V Performance
5
03-01-2015 06:00 AM
el_gringoo
Ford Powerstroke 03-07 6.0L
4
12-14-2014 11:03 PM