Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

stumped in ok

Thread Tools
 
Search this Thread
 
  #1  
Old 04-06-2009, 07:59 PM
jerry fitz's Avatar
Newbie
Thread Starter
Join Date: Apr 2009
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default stumped in ok

05 F350 powerstroke really rough idol only when cold and the colder it is the worse it gets same with smoke only when cold . no codes or check engine light new filters and #8 injector my mechanic said all the others were fine and he didnt know why it was so rough on cold starts. when it gets warm it runs great any help would be great.
 
  #2  
Old 04-06-2009, 08:39 PM
Whit's Avatar
Site Mascot
Join Date: Mar 2007
Location: Why-homing
Posts: 16,010
Received 940 Likes on 701 Posts
Default

my guess would be glowplugs

any Ford gurus here please
 
  #3  
Old 04-07-2009, 12:09 AM
husky74's Avatar
Newbie
Join Date: Mar 2009
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

Have you had a FICM calibration update, (Fuel Injector Control Module), this correct's most of these symptom's.
 
  #4  
Old 04-10-2009, 05:33 PM
Big Angry Hillbilly's Avatar
Diesel Wrench
Join Date: Jan 2009
Posts: 513
Received 46 Likes on 41 Posts
Default

FICM needs updating, or replacing. What is the PID FICM_LPWR, FICM_MPWR reading during KOEO and cranking?

Do the injectors "Rattle" when you turn the key on before you start hte truck?
 
  #5  
Old 04-10-2009, 07:40 PM
clintis's Avatar
Newbie
Join Date: Apr 2009
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

take to ford dealer and have them check out the cylinders that are misfiring on start up shouldnt cost you much, also updating the ficm is a band aid for the misfire on cold start
 
  #6  
Old 04-10-2009, 08:39 PM
Big Angry Hillbilly's Avatar
Diesel Wrench
Join Date: Jan 2009
Posts: 513
Received 46 Likes on 41 Posts
Default

Kind of. If the FICM's wasted, it won't make the necessary 1.21 gigawatts required to ...wait...what?

If it won't make 48V, it won't rattle the injectors properly before startup to help alleviate stiction, or fire them properly during engine running.

The inductive heating flash (if your injectors 'rattle') KILLS FICM's.

We are seeing them drop like flies now that it's starting to get warm out.
 
  #7  
Old 04-11-2009, 09:08 AM
clintis's Avatar
Newbie
Join Date: Apr 2009
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

have seen a lot of ficms dropping around here also, then again everything seems to fail on a 6.0
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smokeyfranklin
Ford 83-94 6.9 and 7.3L General
1
02-19-2015 07:29 PM



Quick Reply: stumped in ok



All times are GMT -5. The time now is 03:48 PM.