I've had this 2004 F350, 6.0 for almost a year now and have tried to do everything right. I have a grocery list of things I've had done to it. (ARP studs, new head gaskets, new oil cooler, new degas bottle, cooling system flush, two new injectors, egr delete, new fuel pump, Ford blue spring in regulator, new HPOP, new IPR, new FICM, mild tune because of the delete, new injector harness, new o rings on injectors, new silicone boot on turbo pipe and now scangauge II)
I programmed in the gauges in the scangauge and now I need to know where I can go to find out what the readings mean. Some of them I understand, but there are several that I don't know what is too much or too little on the readings..
Is there a site or somewhere to go to see what the normal readings should be?

 

Well what readings are you looking for? EOT and ECT most say shouldn't get 15* apart. Ive had my ECT around 215 and EOT 210. My EGTs usually stay around 6-700* at 60-65 mph. Trans roughly 140-180 depending if im in traffic or interstate. Then again every truck, climate, driving conditions, and driver are different.