So since I got rid of my turbo stang and miss going to the track, I'm lookin to speed my truck up a little bit what exactly does it take to get a CC 6L with 35s into the low 13s? For the track id drop tire sizes if I needed to. All my truck has right now is a bullydog PMT and K&N intake. So what's it take? The truck is 4x4 also

 

You need the 4x4 to get traction! haha, Well idk about track time since were all sled pull up here but I did just build a whicked 6.0

07 F250
Head studs(MUST!)
EGR Delete
5" exhaust from bottom bend of DP back
AFE intake
SCT iTSX with Jody's (DP Tuner) tunes

Made 402/798 on 315's at 104* outside with the #5 injector on the way out. So id say 420ish on a good day

Just put in a set of 205 injectors (river city)
Air Dogg 165
Snow performace milage Max

Havent gotten a good run on the dyno yet but first 2 pulls were in the 500-10 range without the water/meth. NEED A BIGGER TURBO!! damn near smokes on idle!

 

Patience and money. Parts, and supporting mods are easy to figure out. The time to tune it will be key.

BTW the BullyDog leaves a finger print on the PCM so expect to get your current PCM reset.