plugging wastegate
#2
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
pull it off the valve and put a plug in the line. clamp plug in and go blow it up. when i plugged mine i jumped up to 18 psi of boost without the trailer hooked up(not much load) and said i seen enough and hooked it back up. anything over 12 psi is just heating the air to much you wont see much increase unless you intercool it.
#3
#8
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
![Whisle](https://www.dieselbombers.com/images/smilies/rolleye0012.gif)
![Cheers](https://www.dieselbombers.com/images/smilies/cheers.gif)
#9
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
you cant just turn up a turbo ... no like an injection pump.... you can over speed a turbo.... and blow the impeller right into your intake ports....
.... then you will need a new motor and a turbo......... so in other words much more that 12 and your pushing your luck all together....if you just wanna blow it up .... get a bigger turbo or a wheel kit... that will do er in.....
![Thumbs Up](https://www.dieselbombers.com/images/smilies/tu.gif)
![Head Bash](https://www.dieselbombers.com/images/smilies/dash2.gif)
#10
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
Lot of variables... Mine has more performance at 7-8 than it did at 13-14 (about 3 seconds difference 0-60), but I also did that test back when it was 100+ degrees out and I have a retarded E4OD.