86 6.9 crank ...no start
#1
86 6.9 crank ...no start
Went to start my f250 today but it will not fire, it has great fuel pressure all the way to the pump ,it will fire on ether, I did not have time to check for fuel at Inj, lines this morning but I will tonight,if I have no fuel from pump to injectors is it reasonable to suspect the fuel solenoid that turns the fuel on and off, I am not very familier with the system on these idi's but just seems logical ...short of a pump that has gone bad....should both wires at the solenoid power up with key on? Thanks in advance
also...New batts, glow plugs working, no fuel leaks...thanks again
also...New batts, glow plugs working, no fuel leaks...thanks again
Thread
Thread Starter
Forum
Replies
Last Post
ish1521
Ford Powerstroke 03-07 6.0L
1
08-26-2015 08:42 PM
ebg2g
5.9 Liter CR Dodge Cummins 03-07
1
03-29-2015 06:15 PM