Ive been looking around for a 3 inch body lift for my truck but every one i find says it will not work on trucks equpied with a diesel engine. whats the difference between these trucks if they r gas or diesel that the lift wont work. where can i find the ones for my truck.

 

they will fit.... with some work. the driverside head hits the firewall when the body is lifted. some massaging witha prybar and it will clear

 

the rattle is horid, but crawler is right i fixed mine up with a bar and a bfh

 

body lifts are a ****** ghetto. put add a leafs or blocks, they can had for just as much $$ half the hassle and save your self that dumb gap between the body and frame. go to JCwhitney good luck

 

the advantage to the body lift is more room for a bigger down pipe. when i replace my motor i am goning to install a 1 inch body lift just for more clearance for turbo and downpipe.

plus if done correctly it is find. add a leafs make the truck ride like a tractor. blocks make axle wrap worse.

 

my truck sits on 8 inch archd leafsprings its getting 4 more inches of add a leafs i want to clear 48s so with the addition of the 3inch body lift ill b able to do it i hate body lifts also but im not gona redo my whole lift

 

deiselcrawler what are you using for 1inch body lift store bought or hockey pucks etc:
I'm thinking of doing same.

 

yea I hear ya, i've heard its easier to reach the uppipes as well

 

i was just going to use pucks. quick and easy.

 

i went to a plastic shop and had uhmw(kinda like plastic) cut 3 inch round 2 inch high, cant tell it from bought lift blocks, works great used it a few times now