burning oil
#13
#14
What is all required to do that. Where to I get the valve seals?
---AutoMerged DoublePost---
I called ford bout the cdr valve its $66 thanks for th part numbers. Where can I get the hose that goes from the bottom of the cdr valve to the engin cuz they don't have that.
---AutoMerged DoublePost---
I called ford bout the cdr valve its $66 thanks for th part numbers. Where can I get the hose that goes from the bottom of the cdr valve to the engin cuz they don't have that.
Last edited by Bigred7.3; 11-01-2010 at 07:38 AM. Reason: Automerged Doublepost
#15
cant use yours?
the valve seals should be able to be had from any good parts store(napa).
will need a valve spring compressor to remove the spring without removing the head. there are 2 different kinds. need the little one that looks like this
Powerhouse: Deluxe Universal Overhead Valve Spring Compressor
then tools to remove the valve covers, and rocker arms. isnt to bad of a job. can get tight in the back cyls, but still possible.
the valve seals should be able to be had from any good parts store(napa).
will need a valve spring compressor to remove the spring without removing the head. there are 2 different kinds. need the little one that looks like this
Powerhouse: Deluxe Universal Overhead Valve Spring Compressor
then tools to remove the valve covers, and rocker arms. isnt to bad of a job. can get tight in the back cyls, but still possible.
Thread
Thread Starter
Forum
Replies
Last Post
Durtyd09
5.9 Liter CR Dodge Cummins 03-07
3
11-11-2015 01:43 PM
vin_diesel
Alternative Fuels , Additives , Fluids
0
09-15-2015 11:25 AM
coors_man_2005
6.7 Liter Dodge Cummins 07.5-12
5
12-15-2014 10:23 AM