what can i do to my motor? iam already going to turn the fuel up and maybe look at the turbo kits and exhaust. is there anything eles i can do to it,thanks=]

 

MAke sure u get a pyro b4 u attempt to turn the pump up

 

Especially if you plan to do any towing, it's not hard to hit piston melting temps with a load behind you.

 

unless you want to pull the engine and build it, thats about all you can do... turn the pump up, turbo, exhaust, intake... you can do propane but i dont recommend it...

 

yeah im not towing anything its gonna be way to big to tow. im am doin 21 inchs and 53' so i wanna do stage 1 injectors turn the pump up and get water methonal injection and get 7'inch aussise stacks,the other thing i wanna do is maybe put a 5.9 cummins in her for the power plant,

 

a few guys over at thedieselstop have installed propane and loved it. drops egt, and engine runs smoother

 

wowo propane on my motor? it wont blow it up? i was told not to do it to my type of motor. ill probaly do water meth be fore i do that but i look into it, thanks for all the info guys! keep it comin! "KNUCKLES DEEP"

 

they plumb it directly into the intake, have WOT switch, and pressure regulator. i forget the pressure they run but it does work on these.

 

oh Wot switch? ive never heard of that. well were would they sell it at?

 

WOT- wide open throttle. normally a micro switch mounted on the throttle linkage that is activated when the pedal is on the floor