88' 7.3l fuel return rail sizing
#1
88' 7.3l fuel return rail sizing
The truck is a 1988 F250 with the 7.3l idi, it had the 5/16 fuel return rail on it. I did not realize it had said size line and purchased a new kit to replace all of the old cracked and leaking lines. I opened the kit and began replacing them only to realize the vast size difference between the two. The new kit is a 3/16. Which I believe was stock.
So my questions are;
Will the smaller return line mess with the way the truck runs?
Is there a horspower cap limit for the smaller lines?
What are the benifits of running the bigger line?
The truck is going to be my daily driver and I have just finished rebuilding the motor and I am not looking to build a monster power truck. I am trying to get the most fuel economy as possible, while still having enough power to tow a horse trailer on occasion. Any help any of you can offer will be greatly appreciated.
So my questions are;
Will the smaller return line mess with the way the truck runs?
Is there a horspower cap limit for the smaller lines?
What are the benifits of running the bigger line?
The truck is going to be my daily driver and I have just finished rebuilding the motor and I am not looking to build a monster power truck. I am trying to get the most fuel economy as possible, while still having enough power to tow a horse trailer on occasion. Any help any of you can offer will be greatly appreciated.
#2
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM
RatsMC
Chevy/GMC 6.2L and 6.5L
19
05-04-2015 05:25 PM